[b1_ana] draft V05

[Elena Long]

Good evening (morning?),

I've put the 9.2% relative error bars on Azz (where I get Azz from the get_b1d script and just multiply it by 0.092) and propagated them to b1. For the Azz plot, they don't actually show up on the scale we're using. 

The difference for Azz is:
   x        Stat      sqrt(Stat^2+Sys^2)
0.16  0.147E-02  0.152E-02
0.28  0.392E-02  0.394E-02
0.36  0.503E-02  0.505E-02
0.49  0.374E-02  0.376E-02


Using db1_tot = sqrt(db1_stat^2 + (1.5*dAzz_sys*F1)^2),

The difference for b1 is:
   x        Stat      sqrt(Stat^2+Sys^2)
0.16  0.182E-02  0.262E-02
0.28  0.275E-02  0.389E-02
0.36  0.232E-02  0.329E-02
0.49  0.839E-03  0.119E-02

Since you can't make out the difference on the Azz plot, I didn't update it. However, the new b1 plot can be found here: http://nuclear.unh.edu/~elong/analysis_files/2013-05-05/b1_stat_wiith_sys_blue.eps

(Both of these are with Pzz=20%)

Take care,
Ellie


On May 5, 2013, at 11:08 PM, Karl Slifer <karl.slifer at unh.edu> wrote:

> 
> Attached please find the latest draft.  Thanks Dustin for the latest updates to the systematic discussion.  If anyone is still up, please run some fresh eyes over section 2.
> 
> 
> 
> 
> <tensor_b1_v05.pdf>_______________________________________________
> b1_ana mailing list
> b1_ana at jlab.org
> https://mailman.jlab.org/mailman/listinfo/b1_ana

--------------------------------------------
Elena Long, Ph.D.
Post Doctoral Research Associate
University of New Hampshire
elena.long at unh.edu
ellie at jlab.org
(603) 862-1962

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/b1_ana/attachments/20130506/49f0d7f8/attachment.html