[Clas12_calcom] Hardware Status Table Tasks

[Florian Hauenstein]

Dear Subsystem experts,

thank you very much to everyone for completing the hardware status table tasks. We will talk about the results (comparison between RGK and RGA Fall 2018 and validation) in more detail in next week's efficiency TF meeting.

Best,
Florian
________________________________
Von: Clas12_calcom <clas12_calcom-bounces at jlab.org> im Auftrag von Florian Hauenstein via Clas12_calcom <clas12_calcom at jlab.org>
Gesendet: Freitag, 7. Juli 2023 13:42
An: clas12_calcom at jlab.org <clas12_calcom at jlab.org>
Betreff: [Clas12_calcom] Hardware Status Table Tasks

Dear Subsystem Experts,

There is some work to do for the hardware status tables for the individual run groups based on current cookings and discussions during CALCOM/efficiency TF. The different tasks are shown below.
The expected completion of the tasks is next Friday (July 14).
Please let me know if you complete the task and if you have further questions or comments.

  *   Task 1: Validation of RGK tables for pass2 cooking:
     *   please validate as before the correct usage of HW tables if you had problematic channels in your detector
     *   Two runs cooked with all banks can be found at
/volatile/clas12/rg-k/production/recon/fall2018/torus+1/6535MeV/pass0/v0_dc_swap_1/full

  *   Task 2: Reupload of RGB Spring 2019 pass 2 tables:
     *   the hardware tables which were uploaded to variation "rgb_spring2019" for pass2 cooking need to be reuploaded with an extended run range. The run range would be 0-6603. If you uploaded a table previously for pass2 cooking, please upload again using the following command:
     *   ccdb add <name_of_table> -v rgb_spring2019 -r 0-6603 table.txtfile
  *
  *   Task 3: Comparison RGA Fall 2018 and RGK tables:
     *   Please determine a common hardware status table for the RGA Fall 2018 if you did not do it already
     *   Compare this table with RGK and let us know how many channels are different. Would it be possible to use a combined table for RGA Fall 2018 and RGK?
     *   In case you need runs to produce RGA Fall 2018 tables, some trains are at /volatile/clas12/rg-a/production/pass0/Fall18/fa18_calib_v0.16/calib/train/ and
     *   /volatile/clas12/rg-a/production/pass0/Fall18/fa18_calib_v0.17/calib/train/

If your detector is not installed during one of the run groups, you can ignore that task of course :)
     Best,
     Florian


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/clas12_calcom/attachments/20230714/32648dd5/attachment.html>