<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
</head>
<body>
<p>Dear all,</p>
<p><b>Update on the outbending data calibration and processing:</b><br>
</p>
<ul>
<li>The final pass0 for the outbending data has been completed
yesterday as well as the monitoring histograms. Timeline has
been submitted last night, however there are some technical
difficulties that Andrey is working on this morning. I will send
an email to everyone once the problem is resolved with the link
to the timeline.<br>
</li>
</ul>
<ul>
<li>The required decoding of the outbeding run period is
completed.</li>
</ul>
<ul>
<li>Pass1 Review for the outbenidng is scheduled for this coming
Wednesday<br>
</li>
</ul>
<p><b>We have also started this Thursday on the following tasks in
parallel:</b><br>
</p>
<ul>
<li><b>Started the process for the calibration of the initial part
of the Fall 2018 inbending: </b>Launched new
monitoring/timeline of the first part of the inbending 4763 to
5031 with the latest monitoring code in order to refine our
requirements for re-calibration of each system and determine for
which run this is needed. During this period we were doing a
lot of detector & DAQ studies. Several runs were taken for
setting up the trigger and the detector HV, thresholds and
timing etc. We have identified all the special and production
runs that we need to process from this period. Our initial
effort is to complete the calibration and processing of runs
needed for the tracking efficiency studies and all the low
luminosity runs, followed by the calibration and processing of
the production runs. Once done this will complete the RGA -
Fall2018 data set!!</li>
</ul>
<ul>
<li><b>Started the process for the calibration of RGA-Spring 2018
Run Period:</b> Launched the processing run 4013 to derive the
initial calibration for all all CLAS12 subsystems for one large
section of spring 2018 run period. This section is our benchmark
set of runs that we have calibrated, analyzed and presented at
DNP 2018.<br>
</li>
</ul>
<ul>
<li><b>Started the process for the calibration of RGA-Spring 2019
Run Period</b>: Launched the processing of 10 files/run for
pass0 from the spring 2019 with an initial calibration that was
derived few weeks ago with almost the latest release. This run
period was very stable, the effort to complete the calibration
of this run period will not be very large.<br>
</li>
</ul>
<p><br>
</p>
<p>Once we have the last 2 bullets completed we will have good
understanding of the data quality and the effort required to
complete each run period. Then we will need to decide as run group
on the priority to complete data calibration and processing
between spring 2018 and spring 2019 RGA-Run Periods.</p>
<p>Best regards,</p>
<p>Latifa<br>
</p>
<p><br>
</p>
<p><br>
</p>
</body>
</html>