[Clas12_rich] Updated EEL 121 drawing

[Tyler Lemon]

Dear Marco, 

We noted some errors in the EEL 121 drawing that I just sent. Attached is an updated drawing with the errors corrected.

Best regards,
Tyler

----- Original Message -----
From: "Tyler Lemon" <tlemon at jlab.org>
To: "Mirazita Marco" <Marco.Mirazita at lnf.infn.it>
Cc: "clas12 rich" <clas12_rich at jlab.org>
Sent: Wednesday, March 23, 2016 8:19:24 AM
Subject: [Clas12_rich] Small cleanroom information

Dear Marco,

Attached is a pdf of the dimensions of EEL 121, the small clean room. If you need any more information regarding the cleanroom, please let us know. Thank you.

Best regards,
Tyler


----- Original Message -----
From: "Mirazita Marco" <Marco.Mirazita at lnf.infn.it>
To: "Brian Eng" <beng at jlab.org>
Cc: "Tyler Lemon" <tlemon at jlab.org>
Sent: Wednesday, March 23, 2016 6:02:52 AM
Subject: Re: [Clas12_rich] Small cleanroom drawing

Dear Tyler, Brian,
could I remind you to send the information on the EEL-121 room?
Thank you,
Marco


Il 2016-03-16 13:31 Brian Eng ha scritto:
> Hi Marco,
> 
> There are two 3'x3' (1" spacing of 1/4-20 threaded holes) optical
> tables that were used for SVT assembly that are in the big cleanroom
> (EEL/124).
> 
> They're not being used right now, but I'm not sure if they're
> scheduled to be used for anything else in the future.
> 
> --
> Brian Eng
> Detector Support Group
> 757-269-6018
> 
> ----- Original Message -----
>> From: "Marco Mirazita" <Marco.Mirazita at lnf.infn.it>
>> To: "Tyler Lemon" <tlemon at jlab.org>
>> Cc: "clas12 rich" <clas12_rich at jlab.org>
>> Sent: Wednesday, March 16, 2016 5:25:16 AM
>> Subject: Re: [Clas12_rich] Small cleanroom drawing
> 
>> Dear Tyler,
>> an AutoCAD file is ok, even if it is not uptodate, I guess the 
>> dimensions
>> of the room are not changed. It would also be useful to have a photo 
>> of
>> the room as it is now.
>> As for the optical tables, for the test we will need at least 3 meters
>> between the mirror to be tested and the photocamera, so a large table
>> of say 3.5x1 m2 would be the best. Alternatively, we could have the 
>> mirror
>> and the photocamera placed on two tables, that could be about 1 m2 
>> each.
>> Thanks,
>> Marco
>> 
>> 
>> 
>> On Fri, 11 Mar 2016, Tyler Lemon wrote:
>> 
>>> Dear Marco,
>>> 
>>> We have a drawing if the small clean room but it is out-of-date. Do 
>>> you need
>>> only the dimensions of the room or also what is currently inside of 
>>> it? Also,
>>> would you want the drawing in an AutoCAD file or as a pdf?
>>> 
>>> Regarding the optical table, what size table would you need?
>>> 
>>> Best regards,
>>> Tyler
>>> 
>>> ----- Original Message -----
>>> From: "Mirazita Marco" <Marco.Mirazita at lnf.infn.it>
>>> To: "Tyler Lemon" <tlemon at jlab.org>
>>> Cc: "Mirazita Marco" <marco.mirazita at lnf.infn.it>
>>> Sent: Friday, March 11, 2016 12:39:59 PM
>>> Subject: mirror testing
>>> 
>>> Dear Tyler.
>>> we are starting the design of the setup for the tests of the mirrors
>>> inside the small clean room.
>>> Do you have any picture, drawing or, even better, 3D models of the 
>>> room?
>>> It would be very helpful to optimize the setup in the environment we
>>> will be.
>>> Also, do you know if there are optical tables that can we use?
>>> Thank you,
>>> Marco
>>> 
>> _______________________________________________
>> Clas12_rich mailing list
>> Clas12_rich at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/clas12_rich
_______________________________________________
Clas12_rich mailing list
Clas12_rich at jlab.org
https://mailman.jlab.org/mailman/listinfo/clas12_rich
-------------- next part --------------
A non-text attachment was scrubbed...
Name: small cleanroom.pdf
Type: application/pdf
Size: 22440 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/clas12_rich/attachments/20160323/d06520d0/attachment-0001.pdf>