[d2n-analysis-talk] analyzer problems

[Brad Sawatzky]

Hi Matthew,

I found an error in the root-setup.sh file.  Try grabbing/sourcing
it again from here:
  /usr/local/d2n_analysis/root-setup.sh

I'm sure I tested it back in November -- not sure how I missed this
mistake...

-- Brad

On Tue, 08 Jan 2013, Matthew R. Posik wrote:

> Hi Brad,
> 
>    I updated the ROOT version like you said. I am able to run the analyzer
> by typing  "analyzer" on the d2n machine. However, I get the following
> error message:
> 
> Error: cannot open file "iostream"  (tmpfile):2:
> *** Interpreter error recovered ***
> Error: cannot open file "_string"  (tmpfile):2:
> *** Interpreter error recovered ***
> Error: cannot open file "RtypesCint.h"  (tmpfile):2:
> *** Interpreter error recovered ***
> 
> When I run "root" from the d2n machine, I now get the following:
> 
> rootx xpm error: XpmOpenFailed
> 
> ROOT 5.18/00 (trunk at 21744, Feb 15 2008, 10:08:00 on linux)
> 
> CINT/ROOT C/C++ Interpreter version 5.16.29, Jan 08, 2008
> Type ? for help. Commands must be C++ statements.
> Enclose multiple statements between { }.
> Error: cannot open file "iostream"  (tmpfile):2:
> *** Interpreter error recovered ***
> Error: cannot open file "_string"  (tmpfile):2:
> *** Interpreter error recovered ***
> Error: cannot open file "RtypesCint.h"  (tmpfile):2:
> *** Interpreter error recovered ***
> 
> I was wondering if you knew what was causing ROOT to fail here?
> 
> Thanks
> Matt
> 
> 
> 
> 
> On Thu, Nov 1, 2012 at 3:03 PM, Brad Sawatzky <brads at jlab.org> wrote:
> 
> > Looks like the computer center changed the default ROOT version
> > underneath us.  I updated the common 'root-setup.sh' script below
> > at the right path.
> >   /usr/local/d2n_analysis/root-setup.sh
> >
> > If you have a personal version of the root-setup (either a copy of that
> > script or explicit lines in your .bashrc/.profile), then you'll need to
> > update with the above script.
> >
> > -- Brad
> >
> > On Thu, 01 Nov 2012, Matthew R. Posik wrote:
> >
> > > Hi Brad,
> > >
> > >   I am trying to run the analyzer on the d2 machine and I get the
> > following
> > > error:
> > >
> > > analyzer: error while loading shared libraries: libCore.so.5.18: cannot
> > > open shared object file: No such file or directory
> > >
> > > Do you know what may be causing this error? I have not changed anything
> > in
> > > my replay directory.
> > >
> > > Thanks
> > > Matt
> > >
> > --
> > Brad Sawatzky, PhD <brads at jlab.org>  -<>-  Jefferson Lab / Hall C / C111
> > Ph: 757-269-5947  -<>-  Fax: 757-269-5235  -<>- Pager: brads-page at jlab.org
> > The most exciting phrase to hear in science, the one that heralds new
> >   discoveries, is not "Eureka!" but "That's funny..."   -- Isaac Asimov
> >
> 
> 
> 
-- 
Brad Sawatzky, PhD <brads at jlab.org>  -<>-  Jefferson Lab / Hall C / C111
Ph: 757-269-5947  -<>-  Fax: 757-269-5235  -<>- Pager: brads-page at jlab.org
The most exciting phrase to hear in science, the one that heralds new
  discoveries, is not "Eureka!" but "That's funny..."   -- Isaac Asimov