[dsg-eic_dirc] DIRC laser safety document

[Tyler Lemon]

Hi Marc,

I've looked over both documents and have some comments and questions:

General
- In both documents, the laser manufacturer is named as "Kimmon". On the laser documentation, the manufacturer is listed as "Kimmon Koha". It may not be important, but I thought I'd mention it.

Laser System Specific Lesson plan document:
- Page 1: under "4.0 Target Audience", the room number is incorrect in the text box that says "Workers need to work in the EEL 102A laser room"

- Page 1: under "7.0 Aids/Handouts" for the text box #2, the contents look incomplete or cutoff. All I can see in that box is "Brief Description: laser system for"

- Page 2: under Objective A, SoB A.3, the eye protection is noted as 7+ OD. Should this be changed to 2+ to match the LOSP?

- Page 6: under SoB D.1, the low-power filter will reduce the laser power by a factor of 100 (document currently says 10).

Laser Operational Safety Procedure:
- Page 4: What is the "Laser Process" for the potential hazard "Temporary or permanent eye damage"? If it's "Operations", that process has another "Temporary or permanent eye damage" hazard row on page 2; could the two rows be combined?

- Page 8: It says "The laser housing is mounted on a stage." From the diagram and from what we've talked about, I thought the laser housing is on a fixed height stand. In the diagram also on page 8, it looks like the laser housing is sitting on extruded aluminum.

- Page 9: under "Hazards" there is "(2+)" after any time it says "laser eye protection". Making it say "(OD 2+)" might make it clearer that the glasses need to be rated correctly and avoid the chance of any misunderstandings as to what 2+ means


-Tyler
________________________________
From: dsg-eic_dirc <dsg-eic_dirc-bounces at jlab.org> on behalf of Marc Mcmullen via dsg-eic_dirc <dsg-eic_dirc at jlab.org>
Sent: Monday, December 12, 2022 10:31 AM
To: dsg-eic_dirc at jlab.org <dsg-eic_dirc at jlab.org>
Cc: Patrizia Rossi <rossi at jlab.org>
Subject: [dsg-eic_dirc] DIRC laser safety document

Hi Beni and Greg,

Attached is the latest update to the LOSP/THA document. I have made some changes to the procedure section and included the Maximum Permissible Exposure information provided by Jen Williams. The procedure section changes included the same details which are in the Laser specific lesson plan and additional text on the "sweep" sub-procedure.

If everyone can review this by Tuesday, and send comments. I can make those changes and submit this for SME reviews. This will put the document on track for approval just after the return from the holiday break.

Regards,
Marc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-eic_dirc/attachments/20221212/c44ccdc8/attachment.html>