[dsg-eic_dirc] [EXTERNAL] Re: EIC-DIRC as built survey of foam padding.

[Shepherd, Matthew]

Hi Greg,

I got these photos and the drawing of the lower support bar from John.   You may need to check the dimensions of the support bar and verify that it matches your inner crate.  

In particular you need to be sure the mounting holes are going to land on something solid under the inner crate. 

Matt

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_3131.jpeg
Type: image/jpeg
Size: 322323 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-eic_dirc/attachments/20231106/df2e7436/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_3132.jpeg
Type: image/jpeg
Size: 242373 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-eic_dirc/attachments/20231106/df2e7436/attachment-0003.jpeg>
-------------- next part --------------


-------------- next part --------------
A non-text attachment was scrubbed...
Name: NEW AIR SPRING BAR.pdf
Type: application/pdf
Size: 147072 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-eic_dirc/attachments/20231106/df2e7436/attachment-0001.pdf>
-------------- next part --------------


> On Nov 3, 2023, at 4:43 PM, Grzegorz Kalicy <gkalicy at jlab.org> wrote:
> 
> Hi George, Tyler,
> 
> As we discussed the 6 new crates will require small modification of padding and side brackets.
> ??????
> Based on the dimensions below the barbox in the upsidedown orientation will have to be  ~4.7cm higher to still stay leveled and have the wedge side supported. 
> That means we should probably add ~ 5cm extra padding (red on the sketch) and add an extra ~5 cm thick piece of wood to the bottom of the side brackets.
> We can look at that on Monday.
> 
> It is most time-critical to make sure we have a list of all needed pieces for the damping system so we can order all remaining components.
> 
> I found a photo of 1/3 bottom suspension pieces before installation.
> 
> <image.png>
> 
> Cheers,
> 
> Greg
> From: dsg-eic_dirc <dsg-eic_dirc-bounces at jlab.org> on behalf of George Jacobs via dsg-eic_dirc <dsg-eic_dirc at jlab.org>
> Sent: Friday, November 3, 2023 3:34 PM
> To: Tyler Lemon <tlemon at jlab.org>
> Cc: dsg-eic_dirc at jlab.org <dsg-eic_dirc at jlab.org>
> Subject: [dsg-eic_dirc] EIC-DIRC as built survey of foam padding.
>  This diagram shows the foam locations and dimensions from the original shipping crate.
> 
> -- 
> George Jacobs
> Jefferson Lab (TJNAF)
> STE 12
> 12000 Jefferson Ave.
> Newport News, VA 23606
> (office) 757-269-7021
> (email) jacobsg at jlab.org
> (url) https://userweb.jlab.org/~jacobsg
> 
> <image(5).png><image(4).png>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4075 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-eic_dirc/attachments/20231106/df2e7436/attachment-0001.p7s>