[dsg-eic_dirc] [EXTERNAL] Re: EIC-DIRC as built survey of foam padding.

[Shepherd, Matthew]

Tyler,

I just sent you a Google drive link to a place that Greg was collecting this documentation.  We uploaded a bunch of stuff there about a year ago.

You can see:

GAS SYSTEMS.pdf

This should be a rough schematic of the air spring suspension system.  I don't think you need the "nitrogen purge system", so just the first page of that is relevant.

There are some other photos.  I can ask John if he has a mechanical drawing of the little brackets that attach the dampers.

Matt


> On Nov 6, 2023, at 10:57 AM, Tyler Lemon <tlemon at jlab.org> wrote:
> 
> Hi Matt,
> 
> Do you also have any drawings or documentation on what was done for the old crates that you are sending photos for?  
> 
> Anything we don't have to make from scratch, including drawings/diagrams/etc., only saves time in the long run.
> 
> -Tyler
> 
> 
> From: Shepherd, Matthew
> Sent: Monday, November 6, 2023 10:55 AM
> To: Grzegorz Kalicy
> Cc: Tyler Lemon; George Jacobs; dsg-eic_dirc at jlab.org
> Subject: [EXTERNAL] Re: EIC-DIRC as built survey of foam padding.
> 
> 
> Hi Greg,
> 
> I got these photos and the drawing of the lower support bar from John.   You may need to check the dimensions of the support bar and verify that it matches your inner crate.  
> 
> In particular you need to be sure the mounting holes are going to land on something solid under the inner crate. 
> 
> Matt


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4075 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-eic_dirc/attachments/20231106/9d9099ac/attachment-0001.p7s>