[dsg-eic_dirc] 2023-09-11 DSG-DIRC meeting minutes

[James Fast]

That works.  Just wanted to make sure people we not pressing for leather gloves which I think would be less safe for people and equipment.
FYI - I did a lot of this for Belle II iTOP in Japan so have experience.

James Fast
EIC Associate Project Manager
MOLLER Project Manager (Emeritus)
Jefferson Lab
757-230-6833 (cell)
757-269-5324 (office)


From: Grzegorz Kalicy <gkalicy at jlab.org>
Date: Wednesday, September 13, 2023 at 9:22 PM
To: Patrizia Rossi <rossi at jlab.org>, Marc Mcmullen <mcmullen at jlab.org>, dsg-eic_dirc at jlab.org <dsg-eic_dirc at jlab.org>, James Fast <jfast at jlab.org>
Subject: Re: 2023-09-11 DSG-DIRC meeting minutes
James,

First of all, a very limited number of people will be actually "touching" the bars. Back in GSI when I had to handle a bar I usually used two layers of gloves, one thicker cotton, and a second nitrile on top of it not leaving any residue.

Cheers,

Greg
________________________________
From: dsg-eic_dirc <dsg-eic_dirc-bounces at jlab.org> on behalf of James Fast via dsg-eic_dirc <dsg-eic_dirc at jlab.org>
Sent: Wednesday, September 13, 2023 6:58 AM
To: Patrizia Rossi <rossi at jlab.org>; Marc Mcmullen <mcmullen at jlab.org>; dsg-eic_dirc at jlab.org <dsg-eic_dirc at jlab.org>
Subject: Re: [dsg-eic_dirc] 2023-09-11 DSG-DIRC meeting minutes


Folks,

You need to balance personnel protection and equipment protection with these.  Any gloves that will protect you will deposit surface contaminants that will then have to be carefully cleaned off to restore reflectivity performance.  Before many bars are handled, that end-to-end process should be developed with demonstration that the surfaces can be adequately restored.



James Fast

EIC Associate Project Manager

MOLLER Project Manager (Emeritus)

Jefferson Lab

757-230-6833 (cell)

757-269-5324 (office)





From: dsg-eic_dirc <dsg-eic_dirc-bounces at jlab.org> on behalf of Patrizia Rossi via dsg-eic_dirc <dsg-eic_dirc at jlab.org>
Date: Wednesday, September 13, 2023 at 1:31 AM
To: Marc Mcmullen <mcmullen at jlab.org>, dsg-eic_dirc at jlab.org <dsg-eic_dirc at jlab.org>
Subject: Re: [dsg-eic_dirc] 2023-09-11 DSG-DIRC meeting minutes

Hi:

Please make sure that you will be using protective gloves when handling the DIRC bars as safe protection for your hands!



patrizia



-------------------------------------------

# Patrizia Rossi
# Jefferson Lab
# 12000 Jefferson Avenue
# Suite 5
# Newport News VA 23606 (USA)
# e-mail: rossi at jlab.org<mailto:rossi at jlab.org>
# phone: +1 (757) 269 7740
# fax: + 1 (757) 269 5800





From: dsg-eic_dirc <dsg-eic_dirc-bounces at jlab.org> on behalf of Marc Mcmullen via dsg-eic_dirc <dsg-eic_dirc at jlab.org>
Date: Tuesday, September 12, 2023 at 8:09 PM
To: dsg-eic_dirc at jlab.org <dsg-eic_dirc at jlab.org>
Subject: [dsg-eic_dirc] 2023-09-11 DSG-DIRC meeting minutes

Hi,



DSG conducts a weekly meeting to discuss the DIRC project. Use following link to view the minutes.



2023-09-11 DSG-DIRC minutes<https://www.jlab.org/sites/default/files/dsg/minutes/eic-dirc/2023-09-11%20DSG%20-%20EIC%20DIRC.pdf>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-eic_dirc/attachments/20230914/78abc89b/attachment-0001.html>