[Dsg-halla] Fwd: Re: Left Dipole PLC

[Jack Segal]

Tyler,
   Many thanks!
   Things seem to be back to normal.
   I learned a bit more about the wiring of the power supply, too. So, progress, of a sort.

On 11/26/2019 4:23 PM, Tyler Lemon wrote:
> Hello Jack,
> 
> DSG's hall A PC (dsg-halla-1) was powered off so that's why Brian couldn't remote in to it. It's booted up now so it should be able to be remotely accessed if needed.
> 
> I tried going online with the left arm PLC (IP 129.57.188.29; hostname ha-plc-dipole-left) and it gave an error that there is no program loaded to the controller. I'm not sure what would have caused the PLC to lose its program.
> 
> I took the latest version of the program from GitHub, downloaded it to the PLC, and put the PLC back in remote run mode.
> 
> As far as I can tell, the PLC is back running okay.
> 
> Best regards,
> Tyler
> 
> 
> 
> 
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> *From:* Dsg-halla <dsg-halla-bounces at jlab.org> on behalf of Jack Segal <segal at jlab.org>
> *Sent:* Tuesday, November 26, 2019 3:53 PM
> *To:* dsg-halla at jlab.org <dsg-halla at jlab.org>
> *Subject:* [Dsg-halla] Fwd: Re: Left Dipole PLC
> Would someone be able to check the PLC in the Hall A Left Dipole? I'm guessing today is
> out, but tomorrow(Wednesday)?
> 
> 
> -------- Forwarded Message --------
> Subject:         Re: Left Dipole PLC
> Date:    Tue, 26 Nov 2019 07:37:17 -0500
> From:    Brian Eng <beng at jlab.org>
> To:      Jack Segal <segal at jlab.org>
> 
> 
> 
> I'm on vacation so won't be on-site, DSG has a laptop that can connect to that PLC.
> 
> On Nov 26, 2019 07:11, Jack Segal <segal at jlab.org> wrote:
> 
>       Sometime today is fine. Hall A is in controlled access. I believe one of our laptops might work. As you know, I get in later...
> 
>       Sent from my iPhone
> 
>           On Nov 25, 2019, at 7:32 PM, Brian Eng <beng at jlab.org> wrote:
> 
>           
>           I found a DSG one, but it looks like it's off/asleep and wakeonlan isn't working.
> 
>           If you know of a Windows computer on the Hall A subnet and have admin access I can install the Rockwell software on it.
> 
>           Someone from the DSG should be able to help in the morning. Pablo is on the rota today if you need something tonight.
> 
>           On Nov 25, 2019 19:21, Brian Eng <beng at jlab.org> wrote:
> 
>               Let me see if I can find a computer that is on the Hall A subnet. I don't have one I use regularly.
> 
>               On Nov 25, 2019 18:55, Jack Segal <segal at jlab.org> wrote:
> 
>                   Brian,
>                       Would you be able to take a look at the PLC for the Left Dipole in Hall A?
>                   Something is not working correctly. I'm just fishing around right now.
>                   --                 John(Jack) Segal
>                   Halls A and C Spectrometer Support Manager
>                   Thomas Jefferson National Accelerator Facility
>                   12000 Jefferson Avenue
>                   Suite 12
>                   Newport News, VA 23606-4486
>                   Phone: (757) 269-7242
>                   Cell: (757) 320-9977
> 
> 
> 
> 
> _______________________________________________
> Dsg-halla mailing list
> Dsg-halla at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-halla

-- 
John(Jack) Segal
Halls A and C Spectrometer Support Manager
Thomas Jefferson National Accelerator Facility
12000 Jefferson Avenue
Suite 12
Newport News, VA 23606-4486
Phone: (757) 269-7242
Cell: (757) 320-9977