[Dsg-halla_ecal] About heating

[Marc Mcmullen]

EEL room 125 at 2pm. It's in the highbay area next to the big clean room.
________________________________
From: Donald Jones <jonesdc at jlab.org>
Sent: Friday, December 16, 2022 1:48 PM
To: Marc Mcmullen <mcmullen at jlab.org>
Cc: shahinya at jlab.org <shahinya at jlab.org>; dsg-halla_ecal at jlab.org <dsg-halla_ecal at jlab.org>
Subject: Re: About heating

Yes, I am here. Where can I meet you?
-Don


Donald Jones
Hall A/C Staff Scientist
Jefferson Lab
Newport News, VA
________________________________
From: Marc Mcmullen <mcmullen at jlab.org>
Sent: Friday, December 16, 2022 1:47 PM
To: Donald Jones <jonesdc at jlab.org>
Cc: shahinya at jlab.org <shahinya at jlab.org>; dsg-halla_ecal at jlab.org <dsg-halla_ecal at jlab.org>
Subject: Re: About heating

Hi Don,

Today is the last day for me until January. I have time to discuss the controls we working on, are you here at the lab?

Marc
________________________________
From: Donald Jones <jonesdc at jlab.org>
Sent: Friday, December 16, 2022 1:44 PM
To: Marc Mcmullen <mcmullen at jlab.org>
Cc: shahinya at jlab.org <shahinya at jlab.org>
Subject: Re: About heating

Hi Marc,
I am the one responsible for performing the new heating test. Albert (cc'd), who led the previous testing effort will be providing instruction and support remotely. Is there a time next week when we can meet to go over the basics of the setup you have designed so I can become familiar with it?
-Don

Donald Jones
Hall A/C Staff Scientist
Jefferson Lab
Newport News, VA
________________________________
From: Marc Mcmullen <mcmullen at jlab.org>
Sent: Monday, December 5, 2022 9:47 AM
To: shahinya at jlab.org <shahinya at jlab.org>
Cc: Bogdan Wojtsekhowski <bogdanw at jlab.org>; Brian Eng <beng at jlab.org>; Jack Segal <segal at jlab.org>; Donald Jones <jonesdc at jlab.org>; dsg-halla_ecal at jlab.org <dsg-halla_ecal at jlab.org>; Bert Manzlak <manzlak at jlab.org>; Ed Folts <folts at jlab.org>
Subject: Re: About heating

Hi Albert,

I am working on the basic monitoring and controls system (for 1 supermodule/heater) in the EEL building. Once I have a good test, I can then expand this for the whole system.

For your test I recommend you contact Bert Manzlak and the area safety warden for the building you will be testing in. They will probably want a HallA-List at the least. Also you should send them  the specification for the heaters.

The 11 prototype heaters DSG procured can be applied to flange 1 of the supermodule. These are designed specifically for use on conductive surfaces (insulated). I can show one of your staff how I applied the heater on to the super module if they have not already done this.

I will keep everyone updated on the controls and monitoring testing.

Marc
[cid:9ab239cc-f080-48b5-914a-26894a0bde77]

________________________________
From: shahinya at jlab.org <shahinya at jlab.org>
Sent: Saturday, December 3, 2022 12:17 AM
To: Marc Mcmullen <mcmullen at jlab.org>
Cc: Bogdan Wojtsekhowski <bogdanw at jlab.org>; Brian Eng <beng at jlab.org>; Jack Segal <segal at jlab.org>; Donald Jones <jonesdc at jlab.org>
Subject: About heating

Hi Marc,

Very soon we will be testing the new heater which you recommend.
I plan to use the new heater only on the front dinner module.
To heat the super modules on the side, use old heather.
Heat the calorimeter around the perimeter also use old heater?
When wrapping an aluminum bar on 3 super modules heater , it will be
normal and safe and secure?
How do you all think about it?

Thank you,
Albert


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_ecal/attachments/20221216/5ba025f9/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_2316.JPG
Type: image/jpeg
Size: 1434755 bytes
Desc: IMG_2316.JPG
URL: <https://mailman.jlab.org/pipermail/dsg-halla_ecal/attachments/20221216/5ba025f9/attachment-0001.jpe>