[Dsg-halla_ecal] Aluminum heating bars

[Bogdan Wojtsekhowski]

Hi Marc,

You are correct, those bars should be longer to allow the heater installation (on front side).

Bogdan
________________________________
From: Dsg-halla_ecal <dsg-halla_ecal-bounces at jlab.org> on behalf of Marc Mcmullen <mcmullen at jlab.org>
Sent: Tuesday, September 6, 2022 12:29 PM
To: dsg-halla_ecal at jlab.org <dsg-halla_ecal at jlab.org>
Subject: [Dsg-halla_ecal] Aluminum heating bars

Hi Bogdon and Albert,

We are reviewing the latest model of the detector stack. Derek has added aluminum bars to the stack for the bottom two rows of supermodules (see attachment). But the aluminum appears to be flush with the modules, will these be extended out in order to apply a heater?

Regards,
Marc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_ecal/attachments/20220906/15e05b15/attachment.html>