[Dsg-halla_ecal] ECal controls

[Marc Mcmullen]

Hi Don,

I have set up a "RT-application" on the cRIO. All controls should be as before. If the software gets stuck, gently push the reset button on the cRIO above the power connector (16 awg black and white twisted pair). The system will reboot (it will take maybe 3 minutes) and start running. You will still have to enable the power supply output and check all your set points.

There is no need to contact DSG, unless rebooting does not work. Datalogging is internal now.

Regards,
Marc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_ecal/attachments/20230815/62ee8a9b/attachment.html>