[Dsg-halla_ecal] Heater power cables

[Marc Mcmullen]

Hi Albert and Don,

The 14awg AC cables arrived and I put them on the desk in the area. The have a UL tag on each cable.

I also installed a second power strip which is on a different circuit. So connecting the heaters to the relays are straightforward.  No need for variacs.

Tomorrow I’ll add more temperature sensors for the additional heaters for the aluminum bar channels.

Marc
________________________________
From: Dsg-halla_ecal <dsg-halla_ecal-bounces at jlab.org> on behalf of Marc Mcmullen via Dsg-halla_ecal <dsg-halla_ecal at jlab.org>
Sent: Tuesday, May 2, 2023 1:12:18 PM
To: dsg-halla_ecal at jlab.org <dsg-halla_ecal at jlab.org>
Subject: [Dsg-halla_ecal] Heater power cables

Hi Albert and Don,

The heater cables for all 5 channels were signed this morning. Grainger typically delivers in one day, it may be in as early as tomorrow.

If it comes in I'll leave them on the table by the test stand. You might want to get some forked or ring lug connectors from the stockroom if you don't already  have some.


Marc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_ecal/attachments/20230504/a764a99b/attachment.html>