[Dsg-halla_ecal] Power supply cables

[Marc Mcmullen]

Thank Mark and Don,

I will add him to the mailing list.

Marc
________________________________
From: Mark Kevin Jones <jones at jlab.org>
Sent: Thursday, June 13, 2024 2:16 PM
To: Donald Jones <jonesdc at jlab.org>; Marc Mcmullen <mcmullen at jlab.org>
Cc: dsg-halla_ecal at jlab.org <dsg-halla_ecal at jlab.org>; Lars Gustavson <larsg at jlab.org>
Subject: Re: Power supply cables

Marc,
larsg at jlab.org is the email for Lars Gustavson

Cheers,

   Mark
________________________________
From: Dsg-halla_ecal <dsg-halla_ecal-bounces at jlab.org> on behalf of Marc Mcmullen via Dsg-halla_ecal <dsg-halla_ecal at jlab.org>
Sent: Thursday, June 13, 2024 12:42 PM
To: Donald Jones <jonesdc at jlab.org>
Cc: dsg-halla_ecal at jlab.org <dsg-halla_ecal at jlab.org>
Subject: [Dsg-halla_ecal] Power supply cables

Hi Don,

I went over to where Lars is working on adding the connectors to the supply.

I checked one cable and the control voltage connector (blue) is opposite on that connector. I am not sure about the others.

For that one, at least one of the power supply output connectors (orange) was correct.

Can you give me Lars' email and/or let me know what time he works on the supplies and I will take him an updated paper coy of the pinout (attached) for the cables.

Marc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_ecal/attachments/20240613/29bcfbe4/attachment.html>