[Dsg-halla_gem] Regulator test

[Marc Mcmullen]

Hi Holly,

Lets make the pressure range from 0 to 8 psi. I just verified that the regulator output pressure is 8 psi.

Regards,
Marc
________________________________
From: Dsg-halla_gem <dsg-halla_gem-bounces at jlab.org> on behalf of Marc Mcmullen <mcmullen at jlab.org>
Sent: Wednesday, April 7, 2021 4:04 PM
To: Holly Szumila-Vance <hszumila at jlab.org>; dsg-halla_gem at jlab.org <dsg-halla_gem at jlab.org>
Subject: Re: [Dsg-halla_gem] Regulator test


Hi Holly,



The logging is back online. Tomorrow is fine, can you email me before you start the test so I can verify the WEDM/MYA is working before you start.



Regards,

Marc McMullen

Sr. Instrumentation Designer

Detector Support Group

(757) 269-7738



From: Holly Szumila-Vance<mailto:hszumila at jlab.org>
Sent: Wednesday, April 7, 2021 4:00 PM
To: Marc Mcmullen<mailto:mcmullen at jlab.org>; dsg-halla_gem at jlab.org<mailto:dsg-halla_gem at jlab.org>
Subject: Re: [Dsg-halla_gem] Regulator test



Hi Marc,



Sounds good-just let me know when you are ready. We could do this tomorrow.



-Holly



From: Dsg-halla_gem <dsg-halla_gem-bounces at jlab.org> on behalf of Marc Mcmullen <mcmullen at jlab.org>
Date: Wednesday, April 7, 2021 at 3:55 PM
To: "dsg-halla_gem at jlab.org" <dsg-halla_gem at jlab.org>
Subject: [Dsg-halla_gem] Regulator test



Hi Holly,



I need to coordinate a test with your group. I need to get data on the flow as we change the pressure regulator from 0 to 9 psi in steps. This will help with the development of the overpressure protection setup using the mineral oil bubblers Brad provided.



I am waiting for the network folks to fix an issue with WEDM and MYA, hopefully that will be fixed soon and we can set up  the test.



Basically I need to lower the pressure regulator to 0, record the baseline flow, then change the regulator to 1 psi for a minute, then 2 psi for a minute...all the way to the current setting of 9 psi.



I'll email you when the logging is back online so we can set it up.



Regards,

Marc


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_gem/attachments/20210407/35982b57/attachment.html>