[Dsg-halla_gem] [EXTERNAL] Re: Prototype gas distribution system

[Anuruddha Rathnayake]

Hi Marc,

Sure thing!

Anu

On Mon, Jan 25, 2021 at 1:20 PM Marc Mcmullen <mcmullen at jlab.org> wrote:

> Thanks Anu,
>
> After everything is connected and gas is flowing please send an email to
> the  dsg-halla_gem at jlab.org  mailing list. Once we can verify that
> everything is flowing, I would like to test readback, by changing the flow
> meter settings in steps. I'll send you some step values when you are
> available to run some tests.
>
> Regards,
> Marc
> ------------------------------
> *From:* Anuruddha Rathnayake <adr4zs at virginia.edu>
> *Sent:* Monday, January 25, 2021 1:12 PM
> *To:* Liyanage, Nilanga K (nl8n) <nl8n at virginia.edu>
> *Cc:* Marc Mcmullen <mcmullen at jlab.org>; dsg-halla_gem at jlab.org <
> dsg-halla_gem at jlab.org>; Jeffas, Sean (sj9ry) <sj9ry at virginia.edu>
> *Subject:* Re: [Dsg-halla_gem] [EXTERNAL] Re: Prototype gas distribution
> system
>
> Hi Marc and Nilanga,
>
> Thank you very much. I'll get it connected asap.
>
> Best
> Anu
>
>
> On Mon, Jan 25, 2021 at 12:56 PM Liyanage, Nilanga K (nl8n) <
> nl8n at virginia.edu> wrote:
>
> Hi Marc
>
> Thanks for taking care of the issues in the gas system.
>
> Anu: I suggest that you (with help from Chuck as needed) reconnect the GEM
> layer to the prototype panel.
>
> Best
>
> Nilanga
> ------------------------------
> *From:* Dsg-halla_gem <dsg-halla_gem-bounces at jlab.org> on behalf of Marc
> Mcmullen <mcmullen at jlab.org>
> *Sent:* Monday, January 25, 2021 12:31 PM
> *To:* dsg-halla_gem at jlab.org <dsg-halla_gem at jlab.org>
> *Subject:* [Dsg-halla_gem] Prototype gas distribution system
>
> Hi Chuck, Anu, and Jack
>
> George has returned the regulator panel to the TEDF and connected the four
> channels not currently in use. He has replaced the faulty regulator, and
> all the gas lines are now polyethylene.  Would it be possible to connect
> the system back up as designed. This would require:
>
>    - The four channels supplying the UVA GEM should be disconnected from
>    the output of the four 500 sccm flow meters and connected to the standard
>    flow channels of the gas flow sensor chassis, on the back of the rack
>    (chassis front), these channels are labeled "Std Flow" (1 to 4)
>
>
>
>    - Four 1/4"  gas lines should be connected from the manifold on the
>    DSG designed regulator panel to connect to the input of the four 500 sccm
>    flow meter, and the supply line from the gas bottle should be connected to
>    the input fitting on the regulator panel.
>
>
>
>
>    - The output of the 500 sccm flow meters should be connected to the
>    corresponding inputs on the back of the Gas Flow Sensor chassis input (back
>    of the chassis), these are labeled "Std Flow" (1 to 4)
>
>
> Once connected and flow has been reestablished, remote monitoring can be
> done by using this link:
>
> Prototype GEM WEDM page
> <https://epicsweb.jlab.org/wedm/screen?edl=%2fcs%2fopshome%2fedm%2fdsg%2fGEM_text.edl>
>
> Using this link only requires your jlab username and cue password, it can
> even be viewed from a smartphone. Please let me know when you are able
> reconnect the system, I will ensure the monitoring software is on.
> Currently, it is running.
>
> Regards,
> Marc
>
>
>
> _______________________________________________
> Dsg-halla_gem mailing list
> Dsg-halla_gem at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-halla_gem
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_gem/attachments/20210125/9a7a614f/attachment.html>