[Dsg-halla_gem] [EXTERNAL] Re: Prototype gas distribution system

Tue Jan 26 11:12:50 EST 2021

Hi Marc,

I just looked and it works.
It seems like the readback is reading out a little less (~230) than what is
says in thr flo meters (~250).

Best
Anu

On Tue, 26 Jan 2021, 11:08 Marc Mcmullen, <mcmullen at jlab.org> wrote:

> It doesn’t matter. Please just leave it.
>
>
>
> Sent from Mail <https://urldefense.proofpoint.com/v2/url?u=https-3A__go.microsoft.com_fwlink_-3FLinkId-3D550986&d=DwIFaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=ChpQznS87yxlRqzuJWHUrVvZvZ9aFu8GaVbYMOIWtqM&m=Imz89hvmAZNRinayZto3IiUbMi2HRzYuAeGJcRLif-4&s=1FxcLVcSAhbCI6z8pu0f5MRTBFPEvEY2VvjsauYRRv8&e= > for
> Windows 10
>
>
>
> *From: *Anuruddha Rathnayake <adr4zs at virginia.edu>
> *Sent: *Tuesday, January 26, 2021 11:07 AM
> *To: *Marc Mcmullen <mcmullen at jlab.org>
> *Cc: *Liyanage, Nilanga K (nl8n) <nl8n at virginia.edu>;
> dsg-halla_gem at jlab.org; Jeffas, Sean (sj9ry) <sj9ry at virginia.edu>
> *Subject: *Re: [Dsg-halla_gem] [EXTERNAL] Re: Prototype gas distribution
> system
>
>
>
> Hi Marc,
>
>
>
> Also, chuck pulled the network cable out when qe tried to re-orient the
> setup a little bit but didn't realize to which port (input/putput) the
> cable was plugged in.
>
>
>
> Could you tell us it whether it's the input or the output?
>
> Right now it's plugged into the output.
>
>
>
> Best
>
> Anu
>
>
>
> On Tue, 26 Jan 2021, 10:57 Anuruddha Rathnayake, <adr4zs at virginia.edu>
> wrote:
>
> Hi Marc,
>
>
>
> Chuck and I started flowing N2 gas through the lines labeled as 1,2,3, and
> 4.
>
> We are purging the system with each flow meter set to 250 cc/min.
>
>
>
> I'll be here until noon if you want to test the system or I can be back
> aroun 2:30 pm to test the readback.
>
>
>
> Best
>
> Anu
>
>
>
> On Mon, 25 Jan 2021, 13:20 Marc Mcmullen, <mcmullen at jlab.org> wrote:
>
> Thanks Anu,
>
>
>
> After everything is connected and gas is flowing please send an email to
> the  dsg-halla_gem at jlab.org  mailing list. Once we can verify that
> everything is flowing, I would like to test readback, by changing the flow
> meter settings in steps. I'll send you some step values when you are
> available to run some tests.
>
>
>
> Regards,
>
> Marc
>
> *From:* Anuruddha Rathnayake <adr4zs at virginia.edu>
> *Sent:* Monday, January 25, 2021 1:12 PM
> *To:* Liyanage, Nilanga K (nl8n) <nl8n at virginia.edu>
> *Cc:* Marc Mcmullen <mcmullen at jlab.org>; dsg-halla_gem at jlab.org <
> dsg-halla_gem at jlab.org>; Jeffas, Sean (sj9ry) <sj9ry at virginia.edu>
> *Subject:* Re: [Dsg-halla_gem] [EXTERNAL] Re: Prototype gas distribution
> system
>
>
>
> Hi Marc and Nilanga,
>
> Thank you very much. I'll get it connected asap.
>
> Best
>
> Anu
>
>
>
>
>
> On Mon, Jan 25, 2021 at 12:56 PM Liyanage, Nilanga K (nl8n) <
> nl8n at virginia.edu> wrote:
>
> Hi Marc
>
>
>
> Thanks for taking care of the issues in the gas system.
>
>
>
> Anu: I suggest that you (with help from Chuck as needed) reconnect the GEM
> layer to the prototype panel.
>
>
>
> Best
>
>
>
> Nilanga
>
> *From:* Dsg-halla_gem <dsg-halla_gem-bounces at jlab.org> on behalf of Marc
> Mcmullen <mcmullen at jlab.org>
> *Sent:* Monday, January 25, 2021 12:31 PM
> *To:* dsg-halla_gem at jlab.org <dsg-halla_gem at jlab.org>
> *Subject:* [Dsg-halla_gem] Prototype gas distribution system
>
>
>
> Hi Chuck, Anu, and Jack
>
>
>
> George has returned the regulator panel to the TEDF and connected the four
> channels not currently in use. He has replaced the faulty regulator, and
> all the gas lines are now polyethylene.  Would it be possible to connect
> the system back up as designed. This would require:
>
>    - The four channels supplying the UVA GEM should be disconnected from
>    the output of the four 500 sccm flow meters and connected to the standard
>    flow channels of the gas flow sensor chassis, on the back of the rack
>    (chassis front), these channels are labeled "Std Flow" (1 to 4)
>
>
>
>    - Four 1/4"  gas lines should be connected from the manifold on the
>    DSG designed regulator panel to connect to the input of the four 500 sccm
>    flow meter, and the supply line from the gas bottle should be connected to
>    the input fitting on the regulator panel.
>
>
>
>
>
>    - The output of the 500 sccm flow meters should be connected to the
>    corresponding inputs on the back of the Gas Flow Sensor chassis input (back
>    of the chassis), these are labeled "Std Flow" (1 to 4)
>
>
>
> Once connected and flow has been reestablished, remote monitoring can be
> done by using this link:
>
>
>
> Prototype GEM WEDM page
> <https://epicsweb.jlab.org/wedm/screen?edl=%2fcs%2fopshome%2fedm%2fdsg%2fGEM_text.edl>
>
>
>
> Using this link only requires your jlab username and cue password, it can
> even be viewed from a smartphone. Please let me know when you are able
> reconnect the system, I will ensure the monitoring software is on.
> Currently, it is running.
>
>
>
> Regards,
>
> Marc
>
>
>
>
>
>
>
> _______________________________________________
> Dsg-halla_gem mailing list
> Dsg-halla_gem at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-halla_gem
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_gem/attachments/20210126/91560221/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 9FE78292289846A3BB3E3E995D71F80E.png
Type: image/png
Size: 160 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-halla_gem/attachments/20210126/91560221/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: B95D57EBFD09491DACB8F995D2D4AB4C.png
Type: image/png
Size: 159 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-halla_gem/attachments/20210126/91560221/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 9FE78292289846A3BB3E3E995D71F80E.png
Type: image/png
Size: 160 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-halla_gem/attachments/20210126/91560221/attachment-0005.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210126_111035.jpg
Type: image/jpeg
Size: 3612981 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-halla_gem/attachments/20210126/91560221/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot_20210126-111051_Chrome.jpg
Type: image/jpeg
Size: 225394 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-halla_gem/attachments/20210126/91560221/attachment-0003.jpg>