[Dsg-halla_gem] GEM PV database file

[Marc Mcmullen]

That will be fine, can you use HAGEM:BB? So we can distinguish between the big bite and super big bite.
________________________________
From: Stephen Wood <saw at jlab.org>
Sent: Friday, July 9, 2021 1:32 PM
To: Marc Mcmullen <mcmullen at jlab.org>
Cc: dsg-halla_gem at jlab.org <dsg-halla_gem at jlab.org>; Ethan Becker <ethanb at jlab.org>; ewertz at email.wm.edu <ewertz at email.wm.edu>; Holly Szumila-Vance <hszumila at jlab.org>
Subject: Re: GEM PV database file

Marc:

I will set these up on adaqsc.

I assume that some other thing will be pushing the values to the signals.

Would it be OK to replace “tedf” in the signal names with “HAGEM”?

Steve


On Jul 9, 2021, at 1:25 PM, Marc Mcmullen <mcmullen at jlab.org<mailto:mcmullen at jlab.org>> wrote:

Hi Steve,

I believe the GEM group will want to start monitoring the BigBite GEM gas flow remotely. I think you said you could add the database file for the PVs to an IOC for Hall A. These PVs will be displayed by a WEDM page on accelerators opsl00 server. I have attached a .txt file which we used for the .db on the IOC when the system was located in the TEDF, but that was on a different subnet which is not available in Hall A.

Regards,
Marc
<Flow_status_TEDFex_032221.txt>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_gem/attachments/20210709/e8d7afb5/attachment-0001.html>