[Dsg-halla_gem] [EXTERNAL] Re: SBS gas distribution rack moved to EEL/125; help setting up?
Jack Segal
segal at jlab.org
Wed Sep 22 13:46:20 EDT 2021
I dropped it off on my way to grab lunch.
On 9/22/2021 1:29 PM, George Jacobs wrote:
> yes, that's it.
>
> --
> George Jacobs
> Jefferson Lab (TJNAF)
> STE 12
> 12000 Jefferson Ave.
> Newport News, VA 23606
> (office) 757-269-7021
> (email) jacobsg at jlab.org
> (url) https://userweb.jlab.org/~jacobsg
>
>
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> *From:* Anuruddha Rathnayake <adr4zs at virginia.edu>
> *Sent:* Wednesday, September 22, 2021 1:26 PM
> *To:* Brad Sawatzky <brad at swatter.net>
> *Cc:* George Jacobs <jacobsg at jlab.org>; Brad Sawatzky <brads at jlab.org>; Kondo Gnanvo <kagnanvo at jlab.org>; John Boyd <jboyd at jlab.org>; Marc Mcmullen <mcmullen at jlab.org>; Jack Segal <segal at jlab.org>; dsg-halla_gem at jlab.org <dsg-halla_gem at jlab.org>
> *Subject:* [EXTERNAL] Re: [Dsg-halla_gem] SBS gas distribution rack moved to EEL/125; help setting up?
> Seems like somebody has brought it in and already started some work.
> George: is this the box you were referring to?
>
> Best,
> Anu
>
>
> On Wed, 22 Sep 2021, 13:02 Brad Sawatzky, <brad at swatter.net <mailto:brad at swatter.net>> wrote:
>
> John or Anu, please work out what this is and grab it from the Hall.
>
> Thanks!
>
> On September 22, 2021 12:51:09 PM EDT, George Jacobs <jacobsg at jlab.org <mailto:jacobsg at jlab.org>> wrote:
>
> There was a blue metal bin on rails with the rack when it was in rm125 previously that contained the hardware for the rack. Could this bin of rack parts be brought back to EEL rm 125?
>
> --
> George Jacobs
> Jefferson Lab (TJNAF)
> STE 12
> 12000 Jefferson Ave.
> Newport News, VA 23606
> (office) 757-269-7021
> (email) jacobsg at jlab.org <mailto:jacobsg at jlab.org>
> (url) https://userweb.jlab.org/~jacobsg <https://userweb.jlab.org/~jacobsg>
>
>
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> *From:* Dsg-halla_gem <dsg-halla_gem-bounces at jlab.org <mailto:dsg-halla_gem-bounces at jlab.org>> on behalf of Brad Sawatzky <brads at jlab.org <mailto:brads at jlab.org>>
> *Sent:* Tuesday, September 21, 2021 10:51 PM
> *To:* Kondo Gnanvo <kagnanvo at jlab.org <mailto:kagnanvo at jlab.org>>; John Boyd <jboyd at jlab.org <mailto:jboyd at jlab.org>>; Rathnayake, Anuruddha (adr4zs) <adr4zs at virginia.edu <mailto:adr4zs at virginia.edu>>; Marc Mcmullen <mcmullen at jlab.org
> <mailto:mcmullen at jlab.org>>
> *Cc:* dsg-halla_gem at jlab.org <mailto:dsg-halla_gem at jlab.org> <dsg-halla_gem at jlab.org <mailto:dsg-halla_gem at jlab.org>>
> *Subject:* [Dsg-halla_gem] [EXTERNAL] SBS gas distribution rack moved to EEL/125; help setting up?
> Hi Marc, et al,
>
> The SBS GEM gas distribution rack was recently moved to EEL/125.
> That is where the SBS GEM layers are being stored and worked on.
>
> Marc, can your group support the GEM group in completing the setup
> of that gas system so they can start flowing gas to the layers in
> EEL/125? It will need to be reconnected to the network, some gas line
> 'jumpers' need to be run between the two sides of the rack, and lines
> need to be run from the rack to the GEM modules themselves. (I believe
> Jack fixed the issue with i2c multiplexing in that rack.)
>
> I also moved a large spool of 1/4" poly into EEL/125 so fresh gas lines
> can be run. General consensus is to position the rack in the most
> convenient location in EEL/125 and run (relatively short) gas lines of
> the needed length to the individual GEM modules. We will cut a set of
> new (longer) gas lines for the final setup in the Hall in a couple
> months.
>
> I'll be out of town for about a week, but I've discussed this with John
> Boyd and Anuruddha, and they are generally in either EEL/125 or /126.
>
> -- Brad
>
> --
> Sent from my Android phone with K-9 Mail. Please excuse my brevity.
>
>
>
> On Wed, 22 Sep 2021, 13:02 Brad Sawatzky, <brad at swatter.net <mailto:brad at swatter.net>> wrote:
>
> John or Anu, please work out what this is and grab it from the Hall.
>
> Thanks!
>
> On September 22, 2021 12:51:09 PM EDT, George Jacobs <jacobsg at jlab.org <mailto:jacobsg at jlab.org>> wrote:
>
> There was a blue metal bin on rails with the rack when it was in rm125 previously that contained the hardware for the rack. Could this bin of rack parts be brought back to EEL rm 125?
>
> --
> George Jacobs
> Jefferson Lab (TJNAF)
> STE 12
> 12000 Jefferson Ave.
> Newport News, VA 23606
> (office) 757-269-7021
> (email) jacobsg at jlab.org <mailto:jacobsg at jlab.org>
> (url) https://userweb.jlab.org/~jacobsg <https://userweb.jlab.org/~jacobsg>
>
>
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> *From:* Dsg-halla_gem <dsg-halla_gem-bounces at jlab.org <mailto:dsg-halla_gem-bounces at jlab.org>> on behalf of Brad Sawatzky <brads at jlab.org <mailto:brads at jlab.org>>
> *Sent:* Tuesday, September 21, 2021 10:51 PM
> *To:* Kondo Gnanvo <kagnanvo at jlab.org <mailto:kagnanvo at jlab.org>>; John Boyd <jboyd at jlab.org <mailto:jboyd at jlab.org>>; Rathnayake, Anuruddha (adr4zs) <adr4zs at virginia.edu <mailto:adr4zs at virginia.edu>>; Marc Mcmullen <mcmullen at jlab.org
> <mailto:mcmullen at jlab.org>>
> *Cc:* dsg-halla_gem at jlab.org <mailto:dsg-halla_gem at jlab.org> <dsg-halla_gem at jlab.org <mailto:dsg-halla_gem at jlab.org>>
> *Subject:* [Dsg-halla_gem] [EXTERNAL] SBS gas distribution rack moved to EEL/125; help setting up?
> Hi Marc, et al,
>
> The SBS GEM gas distribution rack was recently moved to EEL/125.
> That is where the SBS GEM layers are being stored and worked on.
>
> Marc, can your group support the GEM group in completing the setup
> of that gas system so they can start flowing gas to the layers in
> EEL/125? It will need to be reconnected to the network, some gas line
> 'jumpers' need to be run between the two sides of the rack, and lines
> need to be run from the rack to the GEM modules themselves. (I believe
> Jack fixed the issue with i2c multiplexing in that rack.)
>
> I also moved a large spool of 1/4" poly into EEL/125 so fresh gas lines
> can be run. General consensus is to position the rack in the most
> convenient location in EEL/125 and run (relatively short) gas lines of
> the needed length to the individual GEM modules. We will cut a set of
> new (longer) gas lines for the final setup in the Hall in a couple
> months.
>
> I'll be out of town for about a week, but I've discussed this with John
> Boyd and Anuruddha, and they are generally in either EEL/125 or /126.
>
> -- Brad
>
> --
> Sent from my Android phone with K-9 Mail. Please excuse my brevity.
>
--
John(Jack) Segal
Halls A and C Spectrometer Support Manager
Thomas Jefferson National Accelerator Facility
12000 Jefferson Avenue
Suite 12
Newport News, VA 23606-4486
Phone: (757) 269-7242
Cell: (757) 320-9977
More information about the Dsg-halla_gem
mailing list