[Dsg-halla_moller] cabling diagrams

[Mary Ann Antonioli]

Probir, I'm confused as to what I am supposed to be doing with the drawings you attached. I don't know if you are saying to make new drawings, or if somehow these are related to what I have already started.
Mary Ann
________________________________
From: Probir Ghoshal <ghoshal at jlab.org>
Sent: Monday, December 5, 2022 9:35 AM
To: Mary Ann Antonioli <antoniol at jlab.org>; Kaiyi Hall <ckhall at jlab.org>
Cc: Brian Eng <beng at jlab.org>
Subject: Re: cabling diagrams

Mary Ann, Kaiyi.

Please have a look at the reference drawing with details that need to go in.
I am attaching a few for your ready reference.
Kaiyi, Please call Randy and take the drawing #'s for you to start assigning.

US-0, DS1-4 is 1-4 respectively.

Regards
Probir
________________________________
From: Mary Ann Antonioli <antoniol at jlab.org>
Sent: Thursday, December 1, 2022 10:06 AM
To: Probir Ghoshal <ghoshal at jlab.org>; dsg-halla_moller at jlab.org <dsg-halla_moller at jlab.org>
Cc: Kaiyi Hall <ckhall at jlab.org>
Subject: Re: cabling diagrams

I have given Kaiyi the RTD drawing for her to revise for another magnet. Kaiyi, I have attached the VT drawing for you to revise for the magnet you are working on.
________________________________
From: Probir Ghoshal <ghoshal at jlab.org>
Sent: Thursday, December 1, 2022 10:01 AM
To: dsg-halla_moller at jlab.org <dsg-halla_moller at jlab.org>; Mary Ann Antonioli <antoniol at jlab.org>
Cc: Kaiyi Hall <ckhall at jlab.org>
Subject: Re: cabling diagrams

Thanks Mary Ann.
Please get with Kaiyi as well she can have a look.

Regards
Probir


________________________________
From: Dsg-halla_moller <dsg-halla_moller-bounces at jlab.org> on behalf of Mary Ann Antonioli via Dsg-halla_moller <dsg-halla_moller at jlab.org>
Sent: Thursday, December 1, 2022 9:54 AM
To: dsg-halla_moller at jlab.org <dsg-halla_moller at jlab.org>
Subject: [Dsg-halla_moller] cabling diagrams

This is just to inform that I have started the AutoCAD cabling diagrams. I have attached pdfs of the portions done so far for magnet 3's VTs and RTDs, which is from the RTD or VT to the PLC terminal strip. The cable colors are unknown at this time, so not necessarily correct. Also, since I don't have any drawing numbers yet, the location numbers on the left and cable numbers will  need to be updated.
Mary Ann
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_moller/attachments/20221205/85c396dd/attachment.html>