[Dsg-halla_moller_inc] new title block

[Pablo Campero Rojas]

You can change it by selecting all at once, then assign the TEXT1 or TEX2 layer, and finally go to Annotate tab and change the ABC text style.
________________________________
From: Dsg-halla_moller_inc <dsg-halla_moller_inc-bounces at jlab.org> on behalf of Mary Ann Antonioli <antoniol at jlab.org>
Sent: Friday, February 7, 2025 1:52 PM
To: Brian Eng <beng at jlab.org>; dsg-halla_moller_inc at jlab.org <dsg-halla_moller_inc at jlab.org>
Subject: Re: [Dsg-halla_moller_inc] new title block

And another question, or two...
I copied the numbered polygons from some drawing. I don't think the font type is correct, but I can't find where to change it. It's not in properties.
Also, I made the circle leader following instructions on the internet. I don't think that font is correct either but don't see anywhere to change it.

________________________________
From: Brian Eng <beng at jlab.org>
Sent: Friday, February 7, 2025 12:07 PM
To: Mary Ann Antonioli <antoniol at jlab.org>; dsg-halla_moller_inc at jlab.org <dsg-halla_moller_inc at jlab.org>
Subject: Re: new title block

Just change the properties for these on your existing drawing ...

Use 0.175 for the text height for the drawing number.

Everything should be all caps, so your name too.
The date should be in a year month date format according to ASME-Y14.100, so put that has 2025/01/24
Both of those should be 0.1 for the text height.



What isn't clear is what to do about the CAD I.D. NO. block. That's supposed to be the path to where the native file is, but in their example its already at 0.075 (which is less than their minimum of 0.1) and it'd have to be even smaller to actually fit that in. For now just leave that alone and we'll figure it out later.

________________________________
From: Dsg-halla_moller_inc <dsg-halla_moller_inc-bounces at jlab.org> on behalf of Mary Ann Antonioli <antoniol at jlab.org>
Sent: Friday, February 7, 2025 11:27 AM
To: dsg-halla_moller_inc at jlab.org <dsg-halla_moller_inc at jlab.org>
Subject: Re: [Dsg-halla_moller_inc] new title block

Drawing number doesn't fit
[cid:4a76bdce-a1d7-4240-b2fb-52c492c30bbe]

________________________________
From: Dsg-halla_moller_inc <dsg-halla_moller_inc-bounces at jlab.org> on behalf of Mary Ann Antonioli <antoniol at jlab.org>
Sent: Friday, February 7, 2025 9:10 AM
To: Pablo Campero Rojas <campero at jlab.org>; dsg-halla_moller_inc at jlab.org <dsg-halla_moller_inc at jlab.org>
Subject: Re: [Dsg-halla_moller_inc] new title block

Don't even get me started on how JLab slaughters my name. 😡 I will use lower case to keep my name correct. I thought we had to use all upper.

________________________________
From: Pablo Campero Rojas <campero at jlab.org>
Sent: Friday, February 7, 2025 9:06 AM
To: Mary Ann Antonioli <antoniol at jlab.org>
Subject: Re: new title block

Yes, That does' fit.
With the upper case format you can only fit "M. ANTONIOLI"
Do you really need the "A"?
________________________________
From: Mary Ann Antonioli <antoniol at jlab.org>
Sent: Friday, February 7, 2025 8:56 AM
To: Pablo Campero Rojas <campero at jlab.org>
Subject: Re: new title block

No it doesn't.
[cid:0b6e9436-31b2-459c-9bcc-9e9fc3916db5]

________________________________
From: Pablo Campero Rojas <campero at jlab.org>
Sent: Friday, February 7, 2025 8:47 AM
To: Mary Ann Antonioli <antoniol at jlab.org>; dsg-halla_moller_inc at jlab.org <dsg-halla_moller_inc at jlab.org>
Subject: Re: new title block

Yes, we will keep the text format as specified on the title block.
I made a test and your name fits on the drawn box. Just double click the "XXXX" text and add your name.
[cid:b388e97a-d470-4e3f-967d-6c5d2f841615]
________________________________
From: Dsg-halla_moller_inc <dsg-halla_moller_inc-bounces at jlab.org> on behalf of Mary Ann Antonioli <antoniol at jlab.org>
Sent: Friday, February 7, 2025 8:04 AM
To: dsg-halla_moller_inc at jlab.org <dsg-halla_moller_inc at jlab.org>
Subject: [Dsg-halla_moller_inc] new title block

According to the notes on the new title block, the text default height is 0.125. Does this mean it has to stay at that?  I can't even fit my name (using initials for first name) in the block.
I'm not moving forward with this title block at this time, until someone else uses it. This is the third time I will be replacing title blocks and I do not want to do it a fourth time if I can help it.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_moller_inc/attachments/20250207/65800c61/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 123615 bytes
Desc: image.png
URL: <https://mailman.jlab.org/pipermail/dsg-halla_moller_inc/attachments/20250207/65800c61/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 53765 bytes
Desc: image.png
URL: <https://mailman.jlab.org/pipermail/dsg-halla_moller_inc/attachments/20250207/65800c61/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 49094 bytes
Desc: image.png
URL: <https://mailman.jlab.org/pipermail/dsg-halla_moller_inc/attachments/20250207/65800c61/attachment-0005.png>