[Dsg-halla_magnets] Fwd: Hall A Subnets

[Brian Eng]

Tyler sent his email asking about the subnets before I managed to forward the information I got.

It seems like we'll have to go through the CC to get IPs assigned as I don't know who the Sergei or Brad is for Hall A (Brad already has told me he doesn't have the same access for the Hall A networks like he does for Hall C).

Since the initial plan for the Dynapower replacement PLCs is to _NOT_ put them on the network I was planning on just using USB to do the initial development/testing (or one of the other Hall's subnets temporarily) and later on we could put them on the proper subnet.

Begin forwarded message:

From: Carl Bolitho <cbolitho at jlab.org<mailto:cbolitho at jlab.org>>
Subject: Re: Hall A Subnets
Date: April 15, 2019 at 7:46:17 AM EDT
To: Brian Eng <beng at jlab.org<mailto:beng at jlab.org>>

Hi Brian,

Currently there are 4 subnets inside hall a and a development network for outside the hall. They are as follows:

164 subnet : General Purpose
188 subnet : Slow Controls
192 subnet : DAQ
193 subnet : Compton

196 subnet : Dev

--Carl

________________________________
From: Brian Eng
Sent: Friday, April 12, 2019 2:51 PM
To: Carl Bolitho
Subject: Hall A Subnets

Hi Carl,

Brad said you might have the information on what subnets are available for Hall A?

Also, is there a development subnet for devices outside the accelerator fence?

Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20190415/9562c855/attachment-0001.html>