[Dsg-halla_magnets] CLEO Control boards

[Pablo Campero Rojas]

Hello Steven,

With regards to my previous email; if you do not have the bare boards in hand to start the current source boards assembly, Marc will start working on it.


Regards,
Pablo
________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Pablo Campero Rojas <campero at jlab.org>
Sent: Friday, November 8, 2019 1:04 PM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: [Dsg-halla_magnets] CLEO Control boards

Hello Steven,

DSG has not borrow any spare board.

Do you have the bare boards?
If not, Marc McMullen and Peter Bonneau will be able to work and make the arrangements for the bare boards based in the drawing that you shared.
If you have the bare boards and parts, Mindy Leffel can start with the board assembly/soldering required.

Regards,
Pablo

________________________________
From: Steven Lassiter <lassiter at jlab.org>
Sent: Friday, November 8, 2019 9:32 AM
To: Pablo Campero Rojas <campero at jlab.org>
Subject: CLEO Control boards

Hello Pablo,

 Two boxes of parts are in my office for the use in the CLEO control rack.
I could not find a spare constant current source board, did the DSG already borrow that preciously?

I placed the boards drawings in the shared directory. If the spare board is no longer available, then either Chris C group can frabrictae the board else we will have to try contacting the original company and order some more.


Steven
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20191111/b18747c8/attachment-0002.html>