[Dsg-halla_magnets] Hall A SoLID magnet racks layouts

[Pablo Campero Rojas]

Hi Steven,

The PLC and Instrumentation rack's layout drawings have been completed.
The Part List for instrumentation that will be installed in the mentioned racks is completed.
You can access the drawings at your convenience in the following links:

A00000-16-03-0100<https://www.jlab.org/physics/dsg/technical_documentation/hall_a/drawings/A00000-16-03-0100>   Instrumentation Rack Layout Diagram - Front Panel
A00000-16-03-0101<https://www.jlab.org/physics/dsg/technical_documentation/hall_a/drawings/A00000-16-03-0101>   Instrumentation Rack Layout Diagram - Rear Panel
A00000-16-03-0102<https://www.jlab.org/physics/dsg/technical_documentation/hall_a/drawings/A00000-16-03-0102>   Instrumentation Rack -  Frame Layout
A00000-16-03-0103<https://www.jlab.org/div_dept/physics_division/dsg/technical_documentation/Hall_A/SoLID/Drawings/A00000-16-03-0103.pdf>       PLC Rack Layout Diagram
A00000-16-03-0104<https://www.jlab.org/div_dept/physics_division/dsg/technical_documentation/Hall_A/SoLID/Drawings/A00000-16-03-0104.pdf>       PLC Rack - Frame Layout
A00000-16-03-0105<https://www.jlab.org/div_dept/physics_division/dsg/technical_documentation/Hall_A/SoLID/Drawings/A00000-16-03-0105.pdf>       Part List


As you'll notice, for the rack drawings and the part list, I used the new drawing numbers assigned on Hall A SoLID Drawing List v.10 spreadsheet.
Let me know if you have any comments.

Regards,
Pablo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20200827/0e21f975/attachment.html>