[Dsg-halla_magnets] Changing drawing numbers

[Pablo Campero Rojas]

Hi Steven,

Could you modify Column E with the numbers you propose?


- Pablo
________________________________
From: Steven Lassiter <lassiter at jlab.org>
Sent: Wednesday, August 19, 2020 3:48 PM
To: Pablo Campero Rojas <campero at jlab.org>
Subject: Re: [Dsg-halla_magnets] Changing drawing numbers

Hello Pablo,

 We should talk about this.

Potential wasting a lot of numbers by having such large gaps between common elements.

example
A00000-16-03-1109 slot 9 of chassis 1
A00000-16-03-1201 slot 1 of chassis 2

that's over 91 potential drawings that will never be used and there is no physical way to add any hardware between the two chassis.

just one example.

Drawing numbers should have meaning for each digit. groupings by ten or 50 is wasteful.

Steven
________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Pablo Campero Rojas <campero at jlab.org>
Sent: Wednesday, August 19, 2020 3:02 PM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: [Dsg-halla_magnets] Changing drawing numbers

Hi Steven,

I have attached the new version of Hall A SoLID Controls Drawing List spreadsheet.
Column E contains the proposed numbers based on the request made during our last meeting.

Let me know if you have any comments or changes to do, so then we can make the modifications for the completed drawings and continue with the remaining drawings.


Regards,
Pablo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20200820/99243662/attachment-0002.html>