[Dsg-halla_magnets] Moving Lapping machine from Test Lab

[Bogdan Wojtsekhowski]

It was excessed and removed.

________________________________
From: Pablo Campero Rojas <campero at jlab.org>
Sent: Friday, February 28, 2020 1:02 PM
To: Walt Akers <akers at jlab.org>; Bogdan Wojtsekhowski <bogdanw at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: Moving Lapping machine from Test Lab

Hello Bogdan,

Do we have any updates about the re-location/excess of the Lapping Machine?
Please let us know.

Best Regards,
Pablo


________________________________
From: Walt Akers <akers at jlab.org>
Sent: Thursday, February 20, 2020 9:21 AM
To: Bogdan Wojtsekhowski <bogdanw at jlab.org>; Pablo Campero Rojas <campero at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: Moving Lapping machine from Test Lab

Very good.  I have also asked them to make all
lead glass into administrative property that no
longer needs to be validated on an annual basis.

Walt

Bogdan Wojtsekhowski wrote:
Thank you, Walt.
I will ask property to excess that device.

Bogdan
________________________________
From: Walt Akers <akers at jlab.org><mailto:akers at jlab.org>
Sent: Wednesday, February 19, 2020 4:09 PM
To: Pablo Campero Rojas <campero at jlab.org><mailto:campero at jlab.org>; Bogdan Wojtsekhowski <bogdanw at jlab.org><mailto:bogdanw at jlab.org>; dsg-halla_magnets at jlab.org<mailto:dsg-halla_magnets at jlab.org> <dsg-halla_magnets at jlab.org><mailto:dsg-halla_magnets at jlab.org>
Subject: Re: Moving Lapping machine from Test Lab

Hey Bogdan:

If you excess the machine, I'll put in a
work order to have it disconnected and
removed.

Walt

Pablo Campero Rojas wrote:
Hello Bogdan,

We're planning to move a SoLID Magnet Controls rack over the area where the Lapping Machine is located.

Walt Akers mentioned that this machine is not going to be use anymore and probably it will be exceed out.
Since you are the owner. Could you please make the arrangements to move it?

Thanks,
Pablo



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20200228/0b415732/attachment-0002.html>