[Dsg-halla_magnets] Liquid Level Monitor

[Brian Eng]

Steve,

I looked around and it seems like only AMI is still producing a liquid level readout, if Lakeshore still has one I couldn't find it on their active products.

http://americanmagnetics.com/1700.php

The AMI unit is a bit cheaper than the LM-150 however it only has a single I/O connector and has a single 0-10V and 4-20mA output, whereas the LM-510 has 2 of each.

Is AC line voltage output (to control a valve) something that will be needed?

________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Brian Eng <beng at jlab.org>
Sent: Wednesday, May 6, 2020 12:05 PM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: [Dsg-halla_magnets] Liquid Level Monitor

The Hall C Magnets used an LM-500, but it looks like the LM-510 with dual sensor capability would be the one to use for SoLID.

https://www.cryomagnetics.com/products/model-lm-510-liquid-cryogen-monitor/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20200611/b3698312/attachment.html>