[Dsg-halla_magnets] SoLID Motor Controller Relay PCB

[Jack Segal]

We are presently using the Omron G5V-2 for the relay on those. They are socketed on the board,
as must be on the boards you are designing also. It is a common, industry standard footprint.

On 5/6/2020 12:54 PM, Marc Mcmullen wrote:
> Hi Jack and Heidi,
> 
> The DSG had a meeting with Steve Lassiter and Whit Seay earlier today, Steve says you may have some relays for the 24 channel Motor Controller relay board at the lab. We are designing the replacement board for this. The part on the board is RD2N-1U. It is 
> an obsolete part, so if you don't have these, I'll find a suitable replacement.
> 
> Thanks
> Marc

-- 
John(Jack) Segal
Halls A and C Spectrometer Support Manager
Thomas Jefferson National Accelerator Facility
12000 Jefferson Avenue
Suite 12
Newport News, VA 23606-4486
Phone: (757) 269-7242
Cell: (757) 320-9977