[Dsg-halla_magnets] Voltage tap cable selection

[Marc Mcmullen]

Hi Joe,

DSG has completed research on voltage tap cables, we have narrowed it down to 4 selections (see attachment).

Steve has stated in this morning’s meeting that the CL2 rating is not necessary as the cables will not pass through wall penetrations. For SoLID magnet, the cables will only run in the cable tray. Will the VW-1/FT-1 rating work for this?

Per Steve’s comment from the meeting this morning, Voltage Tap cables 1, 2, or 3 are acceptable (pending clarification from Joe Beaufait on the fire rating).

After the fire rating has been clarified DSG will notify the mailing list of the selected cable and proceed with procurement.


Regards,
Marc McMullen
Sr. Instrumentation Designer
Detector Support Group
(757) 269-7738

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20210428/27204d57/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SoLID Cables_VT.xlsx
Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
Size: 11046 bytes
Desc: SoLID Cables_VT.xlsx
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20210428/27204d57/attachment.xlsx>