[Dsg-halla_magnets] Voltage tap cable selection
Marc Mcmullen
mcmullen at jlab.org
Wed Apr 28 12:52:39 EDT 2021
Steve says that these cables will not be run in that manner, if you would like more details Steve would be a good source of information on the cable routing.
Regards,
Marc McMullen
Sr. Instrumentation Designer
Detector Support Group
(757) 269-7738
From: Joe Beaufait<mailto:beaufait at jlab.org>
Sent: Wednesday, April 28, 2021 12:29 PM
To: Marc Mcmullen<mailto:mcmullen at jlab.org>; dsg-halla_magnets at jlab.org<mailto:dsg-halla_magnets at jlab.org>
Subject: Re: Voltage tap cable selection
The vw-1 ft 1 ratings are ok for the hall as long as you don't have any wall penetration or vertical shafts.
From: Marc Mcmullen <mcmullen at jlab.org>
Sent: Wednesday, April 28, 2021 12:09 PM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>; Joe Beaufait <beaufait at jlab.org>
Subject: Voltage tap cable selection
Hi Joe,
DSG has completed research on voltage tap cables, we have narrowed it down to 4 selections (see attachment).
Steve has stated in this morning’s meeting that the CL2 rating is not necessary as the cables will not pass through wall penetrations. For SoLID magnet, the cables will only run in the cable tray. Will the VW-1/FT-1 rating work for this?
Per Steve’s comment from the meeting this morning, Voltage Tap cables 1, 2, or 3 are acceptable (pending clarification from Joe Beaufait on the fire rating).
After the fire rating has been clarified DSG will notify the mailing list of the selected cable and proceed with procurement.
Regards,
Marc McMullen
Sr. Instrumentation Designer
Detector Support Group
(757) 269-7738
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20210428/2babfed6/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: E63ABD3E8E0D4F8EBBD83B0F7855A736.png
Type: image/png
Size: 159 bytes
Desc: E63ABD3E8E0D4F8EBBD83B0F7855A736.png
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20210428/2babfed6/attachment-0002.png>
More information about the Dsg-halla_magnets
mailing list