[Dsg-halla_magnets] Instrumentation and PLC racks final location

[Pablo Campero Rojas]

My understanding was that cables will be used not only for the testing stage but also for the final magnet location, at least the lengths for the previous cables were ordered under this assumption.

If the three racks will be located next to each other, then we can consider ~ 25 feet long cables (e.g. cables from terminal strip to signal conditioning module).



________________________________
From: Steven Lassiter <lassiter at jlab.org>
Sent: Thursday, June 17, 2021 4:56 PM
To: Pablo Campero Rojas <campero at jlab.org>
Subject: Re: Instrumentation and PLC racks final location

For the testing the racks can be placed next to each other or near each other within ten feet

Steven
________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Pablo Campero Rojas <campero at jlab.org>
Sent: Thursday, June 17, 2021 4:54 PM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: [Dsg-halla_magnets] Instrumentation and PLC racks final location

Hi Steven,


Can you confirm if the two instrumentation racks and the PLC rack will be located next to each other?
If not, do you know the expected distance between them?

We need this information to estimate the length of the cables that we're researching.


Thanks,
Pablo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20210617/8a49c808/attachment-0002.html>