[Dsg-halla_magnets] CCR connector

[Whit Seay]

It appears that there is copper inside each hole which I would assume was the socket pins.  I did not see a way to separate the connector easily to see inside for sure.  There were no bags of pins in the two cardboard boxes sitting on the crate.  The did appear to be two caps to cover the connector on the feed through.

________________________________
From: Steven Lassiter <lassiter at jlab.org>
Sent: Thursday, May 6, 2021 12:09 PM
To: Whit Seay <wseay at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: CCR connector

Do the mating connectors have sockets for soldering wire or do they need socket pins

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Whit Seay <wseay at jlab.org>
Sent: Thursday, May 6, 2021 12:06:10 PM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: [Dsg-halla_magnets] CCR connector

Instrument A and Instrument B has the big feed through connectors on them.  Both came with the mating connector too.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20210506/5b472da9/attachment-0002.html>