[Dsg-halla_magnets] CCR connector

[Whit Seay]

After I figured out how to remove the backside of the connector this is what we have (on both).[Image]


________________________________
From: Brian Eng <beng at jlab.org>
Sent: Thursday, May 6, 2021, 12:13 PM
To: Whit Seay; dsg-halla_magnets at jlab.org
Subject: Re: CCR connector

Those connectors (the mates to the flange connector) are the ones we had questions about if they already came with pins or not since it wasn't clear from the part # webpage if they did.

________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Whit Seay <wseay at jlab.org>
Sent: Thursday, May 6, 2021 12:06 PM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: [Dsg-halla_magnets] CCR connector

Instrument A and Instrument B has the big feed through connectors on them.  Both came with the mating connector too.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20210506/1aa1a92d/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: processed.jpeg
Type: image/jpeg
Size: 516020 bytes
Desc: processed.jpeg
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20210506/1aa1a92d/attachment-0002.jpeg>