[Dsg-halla_magnets] 2021-05-19 DSG-Hall A SoLID Magnet Controls Meeting Minutes

[Steven Lassiter]

That part number for the JT motor cable side circular connector is obsolete I have been told. the new part number is

The connector part number is UT06128SH

Steven
________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Steven Lassiter <lassiter at jlab.org>
Sent: Monday, May 24, 2021 4:01 PM
To: Pablo Campero Rojas <campero at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: [Dsg-halla_magnets] 2021-05-19 DSG-Hall A SoLID Magnet Controls Meeting Minutes

Hi

 The motor connector part number is
G6F12-88 SNE

Steven
________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Steven Lassiter <lassiter at jlab.org>
Sent: Monday, May 24, 2021 11:13 AM
To: Pablo Campero Rojas <campero at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: [Dsg-halla_magnets] 2021-05-19 DSG-Hall A SoLID Magnet Controls Meeting Minutes

Hi

Looking at some of the questions raised during the last Solid magnet controls meeting:

The JT motor and LVDT connections can be found in drawing 67145-00650 Rev B.

The male connections on the JT assembly are:
Motor connector is GOB-12-88 PN Bantamate
LVDT connector is MS-3120E10-6P.

The cables will need the female connector :
Not sure what the Motor connector part number is. It is a circular connector with 8 pins.
LVDT - MS3126F10-6s

DSG can order these connectors.

There are 36 MacroSensor 2412 LVDT units available to be used (4 of which are new). These were the original cards used on the HMS that were replaced by the 2500 model. Should be more than enough to cover CLEO needs as they will not experience high radiation dose as seen by the HallC controls.

Motor cables should be able to handle 24V and 2.2Amps
LVDT cables are low voltage low current.

Let me know if there other questions that I missed.
Steven

________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Pablo Campero Rojas <campero at jlab.org>
Sent: Friday, May 21, 2021 9:27 AM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Cc: Patrizia Rossi <rossi at jlab.org>
Subject: [Dsg-halla_magnets] 2021-05-19 DSG-Hall A SoLID Magnet Controls Meeting Minutes

Hello,

The minutes for the meeting held on Wednesday was posted.
Here is the link: <https://www.jlab.org/div_dept/physics_division/dsg/meeting_minutes/Hall_A/2021-03-10%20Hall%20A%20SoLID%20Magnet%20Control%20Systems%20meeting%20minutes.pdf> May 19, 2021 DSG- Hall A SoLID Magnet Controls meeting minutes<https://www.jlab.org/div_dept/physics_division/dsg/meeting_minutes/Hall_A/2021-05-19%20Hall%20A%20SoLID%20Magnet%20Control%20Systems%20meeting%20minutes.pdf><https://www.jlab.org/div_dept/physics_division/dsg/meeting_minutes/Hall_A/2021-05-19%20Hall%20A%20SoLID%20Magnet%20Control%20Systems%20meeting%20minutes.pdf>


Regards,
Pablo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20210525/01227f48/attachment-0002.html>