[Dsg-halla_magnets] CLEO strain gauge N

[Steven Lassiter]

Hi,

 The radial strain gauge N connector is wired upside down.
See attached photo. Hard to see but the large notch is at the top for both connectors.

This connector is on the extension cable coming from the sensor housing, over the top and down along the side of the magnet. It connects to the long 100ft cable that goes to the rack.

Also the Label is about to come off and needs a new one put on.

Thanks
Steven
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220802/b3517c9b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0641.JPG
Type: image/jpeg
Size: 3689202 bytes
Desc: IMG_0641.JPG
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220802/b3517c9b/attachment-0001.jpe>