[Dsg-halla_magnets] CLEO controls

[Steven Lassiter]

Hi Pablo
I have the power cords and breakers and will move them to the rack tomorrow.
I also have the dataforth signal conditioners that I will bring over
They other outstanding wiring sounds like just a  few hours task to complete.

Thanks for the update
Steven

________________________________
From: Pablo Campero Rojas <campero at jlab.org>
Sent: Tuesday, January 18, 2022 2:59 PM
To: Steven Lassiter <lassiter at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: CLEO controls

Hello Steven,

Racks can not be powered up tomorrow.

We still need to work in the following items:

  *   Need to connect some jumpers bars in the PLC terminal block (some of them terminal block groups).
  *   Wires from 5 and 24 VDC power supplies to main breakers (10 A and 5A) are not connected yet.
  *   We do not have the power cords and power terminals for the power supplies.
  *   Missing five breakers for safe power distribution. Did you get the breakers I requested you two weeks ago? We need to install them prior to powering the racks.

Our plan was to install the Dataforth modules and power strips on Thursday, if you can provide the missing breakers and power cords for the power supplies, we can install them as well and then proceed with the powering of the racks.

We can discuss more details in our meeting tomorrow.


Pablo


________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Steven Lassiter <lassiter at jlab.org>
Sent: Tuesday, January 18, 2022 2:34 PM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: [Dsg-halla_magnets] CLEO controls

Hello Pablo,

 Will the control rack be in a state that it can be powered up tomorrow?

Looking to put in the Dataforth signal conditioners and power cords. If that goes well then a I have a few resistors that mimic temperatures sensors that can be temporary installed.

I plan on being in the test lab most of the day tomorrow.

thanks
Steven

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20220118/fb5a2c1d/attachment-0002.html>