[Dsg-halla_magnets] SoLID magnet radial support cables

[Pablo Campero Rojas]

Hello Steven,

We're working on old cables ( cut cables hanging on the magnet) for the radial load sensors, we noticed that these cables don't have a drain wire but they have a braid that could be used instead.

Can you confirm if we will need a drain wire for the strain load sensor connectors used to attached the old with the new 100' cables ?

Based on the developed drawings, we do not show a drain wire for the connections.

Thanks,
Pablo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220311/1ca07c5c/attachment.html>