[Dsg-halla_magnets] ten pin connector pins bent

[Steven Lassiter]

Hello,

 Could someone look into straighten some bent pins on the CLEO Current Lead service can fed thru?
A few of the pins on the ten pin original feed thrus are bent and need to be repaired if possible.
Are these feed thru still available?  If so it would be advantageous ( or essential) to have spare feed thru on hand.

Also, Hall A is saying it is necessary to separate the wiring from the fed thrus to service the can.  This may entail cutting the wires and re soldering them. They may need help in doing this job as well.


Thanks
Steven
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220511/fe88e383/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20220330_111903.jpg
Type: image/jpeg
Size: 2980653 bytes
Desc: 20220330_111903.jpg
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220511/fe88e383/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20220119_110309.jpg
Type: image/jpeg
Size: 2844903 bytes
Desc: 20220119_110309.jpg
URL: <https://mailman.jlab.org/pipermail/dsg-halla_magnets/attachments/20220511/fe88e383/attachment-0003.jpg>