[dsg-halla_solid] SoLID Magnet Controls updates

[Pablo Campero Rojas]

Hi Amrit,

The 34 HMI screens needed for the low current test are completed and ready to be used.
There is some signals that need to be added and tested in the PLC once the cable to the power supply is connected.

--Pablo
________________________________
From: Amrit Yegneswaran <yeg at jlab.org>
Sent: Thursday, November 17, 2022 9:39 AM
To: dsg-halla_solid at jlab.org <dsg-halla_solid at jlab.org>; Pablo Campero Rojas <campero at jlab.org>
Cc: Patrizia Rossi <rossi at jlab.org>
Subject: Re: [dsg-halla_solid] SoLID Magnet Controls updates

excellent pablo
good work by the group

most plc programs and HMI screen?
can you be specific.
i'm guessing you are completing the last PLC progam

________________________________
From: dsg-halla_solid <dsg-halla_solid-bounces at jlab.org> on behalf of Pablo Campero Rojas via dsg-halla_solid <dsg-halla_solid at jlab.org>
Sent: Thursday, November 17, 2022 9:26 AM
To: dsg-halla_solid at jlab.org <dsg-halla_solid at jlab.org>
Cc: Patrizia Rossi <rossi at jlab.org>
Subject: [dsg-halla_solid] SoLID Magnet Controls updates

Hello,

Most of the PLC programming and HMI screens are done.
Waiting on solution from vendor (EECCO) of software that will be needed to transfer data between PLC and EPICS, if solution does not work, then we will implement EPICS sofIOC to transfer data between PLC and EPICS (same as other Halls).
The cable needed for the readout of the voltage taps from the magnet to the resistor box and the cable to readout signals from the power supply are being fabricated.

At this time, DSG doesn't know the date for the low current test.
For now DSG is focusing on the assigned tasks for the NPS project, but support to accomplish the with low current test of magnet will be provided as needed.

--Pablo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20221117/edb1d92f/attachment.html>