[dsg-halla_solid] CLEO Magnet Voltage tap cable connector info

[Ellen Becker]

Hi Pablo,

Yeah, that's perfect! I bought extra just in case.

Ellen
________________________________
From: Pablo Campero Rojas <campero at jlab.org>
Sent: Wednesday, October 12, 2022 7:53 PM
To: Ellen Becker <ebecker at jlab.org>; dsg-halla_solid at jlab.org <dsg-halla_solid at jlab.org>
Subject: Re: CLEO Magnet Voltage tap cable connector info

Hello Ellen,

For the needed connector for the input of the resistor box, we are planing to use the same connector as the one to be used for the output. I sent you the specs and information of the connector on my first email.


Will these connectors be adequate to use with your resistor box design?
Please let us know.

-Pablo

________________________________
From: Pablo Campero Rojas <campero at jlab.org>
Sent: Wednesday, October 5, 2022 5:41 PM
To: Ellen Becker <ebecker at jlab.org>; dsg-halla_solid at jlab.org <dsg-halla_solid at jlab.org>
Subject: Re: CLEO Magnet Voltage tap cable connector info

Hello Ellen,

It was decided that DSG will be working on the fabrication of the required cables.


--Pablo
________________________________
From: Ellen Becker <ebecker at jlab.org>
Sent: Tuesday, October 4, 2022 1:28 PM
To: Pablo Campero Rojas <campero at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: CLEO Magnet Voltage tap cable connector info

Ok, thanks for the information! Is that cable something your group will take care of, or is that something I should plan on getting together?
________________________________
From: Pablo Campero Rojas <campero at jlab.org>
Sent: Wednesday, September 28, 2022 1:09 PM
To: Ellen Becker <ebecker at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: CLEO Magnet Voltage tap cable connector info

Hello Ellen,

There isn't a cable done for the magnet side.
The cable/s needed will connect the magnet turret flange (shown in the previous attached drawings) to the resistor box input.
The connectors at the turret flange air side are 10-pin connectors (See attached picture). The connector for the resistor box input has not been defined yet.

Also, there are two voltage taps (vt6 and vt7) that will be connected directly from the leads to the resistor box ( cable/s for it isn't done yet).

--Pablo

________________________________
From: Ellen Becker <ebecker at jlab.org>
Sent: Wednesday, September 28, 2022 9:07 AM
To: Pablo Campero Rojas <campero at jlab.org>
Subject: Re: CLEO Magnet Voltage tap cable connector info

Hi Pablo,

Thanks for the info! I was actually wondering about the connector between the resistor box and the magnet. What is on the magnet side of the cable? Is there a cable already made for that?

Thanks,
Ellen

________________________________
From: Pablo Campero Rojas <campero at jlab.org>
Sent: Wednesday, September 28, 2022 9:04 AM
To: Ellen Becker <ebecker at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: CLEO Magnet Voltage tap cable connector info

Hello Ellen,

I have been told that you require information about the connector used at one end of the voltage tap cable to work on the resistor box.

I have attached drawings showing cable #401-01 (cable that will be used from the resistor box to the instrumentation rack) with its connector specifications.

The CPC-male connector was already installed to cable #401-01 and the CPC-female connector (expected to be installed in the resistor box) is on hand located in the Test Lab, in the cabinet next to the magnet instrumentation rack.

Here are the links showing the CPC connector specifications.
https://www.mouser.com/ProductDetail/TE-Connectivity/213862-1?qs=n9k6nLIWMXlQqi25DTLO3w%3D%3D&gclid=CjwKCAjwj6SEBhAOEiwAvFRuKGUZ24E_QLYpZKQn4ZSGS8Sv5uWnRAjfCIFx-l-g5RLNsn-yi4vmHBoCEb4QAvD_BwE

https://www.mouser.com/ProductDetail/TE-Connectivity/213849-1?qs=%2Fha2pyFaduhR0UZrYgWFgvABj6oH%252BE3UdioYF%252BD2w8M%3D
[https://www.mouser.com/images/tycoelectronics/images/206060-1_SPL.jpg]<https://www.mouser.com/ProductDetail/TE-Connectivity/213849-1?qs=%2Fha2pyFaduhR0UZrYgWFgvABj6oH%252BE3UdioYF%252BD2w8M%3D>
213849-1 TE Connectivity | Mouser<https://www.mouser.com/ProductDetail/TE-Connectivity/213849-1?qs=%2Fha2pyFaduhR0UZrYgWFgvABj6oH%252BE3UdioYF%252BD2w8M%3D>
213849-1 TE Connectivity Standard Circular Connector PLG PIN 17-16 F/H datasheet, inventory, & pricing.
www.mouser.com

[https://www.mouser.com/images/tycoelectronics/images/206036-1_SPL.jpg]<https://www.mouser.com/ProductDetail/TE-Connectivity/213862-1?qs=n9k6nLIWMXlQqi25DTLO3w%3D%3D&gclid=CjwKCAjwj6SEBhAOEiwAvFRuKGUZ24E_QLYpZKQn4ZSGS8Sv5uWnRAjfCIFx-l-g5RLNsn-yi4vmHBoCEb4QAvD_BwE>
213862-1 TE Connectivity | Mouser<https://www.mouser.com/ProductDetail/TE-Connectivity/213862-1?qs=n9k6nLIWMXlQqi25DTLO3w%3D%3D&gclid=CjwKCAjwj6SEBhAOEiwAvFRuKGUZ24E_QLYpZKQn4ZSGS8Sv5uWnRAjfCIFx-l-g5RLNsn-yi4vmHBoCEb4QAvD_BwE>
213862-1 TE Connectivity Standard Circular Connector RECEPT SQ FLANGE SIZE 17-16 datasheet, inventory, & pricing.
www.mouser.com



Let me know if more information is needed.

--Pablo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20221013/586c0e90/attachment-0001.html>