[Dsg-halla_magnets] phycad58 computer down

[Steven Lassiter]

Hi
If phycad58 is still in tedf 1544, then Bert M has a key to the room. See Bert or Paulo or Dean for the key.

Steven
________________________________
From: Whit Seay <wseay at jlab.org>
Sent: Wednesday, September 7, 2022 10:33 AM
To: Steven Lassiter <lassiter at jlab.org>; Pablo Campero Rojas <campero at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: phycad58 computer down

Where is 58 located?  If it is not in the locked Hall C room downstairs then I can check on it.
________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Steven Lassiter <lassiter at jlab.org>
Sent: Wednesday, September 7, 2022 10:22 AM
To: Pablo Campero Rojas <campero at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: [Dsg-halla_magnets] phycad58 computer down

No but the most likely scenario is that the computer is off and needs to be power cycled
You can walk over and check it

I am on vacation this week
Steven

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Pablo Campero Rojas <campero at jlab.org>
Sent: Wednesday, September 7, 2022 10:04:10 AM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: [Dsg-halla_magnets] phycad58 computer down

Hello Steven,


I've trying to access PHYCAD58 computer remotely to work on the modifications for the HMI screen for the HX valves, but computer is not responding to the network ping command.

Do you know what is the status of the PHYCAD58 computer?


-Pablo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20220907/e959e34d/attachment-0002.html>