[Dsg-halla_magnets] phycad58 computer down

[Pablo Campero Rojas]

Hello Whit,

It worked, I can access it now

thanks!
-Pablo
________________________________
From: Whit Seay <wseay at jlab.org>
Sent: Wednesday, September 7, 2022 12:30 PM
To: Pablo Campero Rojas <campero at jlab.org>; dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: Re: phycad58 computer down

Pablo,

I was able to find a key to get into the room.  PHYCAD 58 was off.  I started it up so let me know if you can access it now.

Thanks,

Whit
________________________________
From: Dsg-halla_magnets <dsg-halla_magnets-bounces at jlab.org> on behalf of Pablo Campero Rojas <campero at jlab.org>
Sent: Wednesday, September 7, 2022 10:04 AM
To: dsg-halla_magnets at jlab.org <dsg-halla_magnets at jlab.org>
Subject: [Dsg-halla_magnets] phycad58 computer down

Hello Steven,


I've trying to access PHYCAD58 computer remotely to work on the modifications for the HMI screen for the HX valves, but computer is not responding to the network ping command.

Do you know what is the status of the PHYCAD58 computer?


-Pablo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20220907/391c6af5/attachment-0002.html>