[dsg-halla_solid] More PLC signals to be monitored in EPICS

[Robert Norton]

I will have these done soon. Thanks for your patience.
________________________________
From: Pablo Campero Rojas <campero at jlab.org>
Sent: Tuesday, March 7, 2023 12:08 PM
To: Robert Norton <norton at jlab.org>; dsg-halla_solid at jlab.org <dsg-halla_solid at jlab.org>
Subject: More PLC signals to be monitored in EPICS

Hello Robert,

Can you add more signals  in the EPICS side?
Below is the list.

#
Name    Data Type       Access Type     Units
1
ecLN2_CD_Delta2 Real    Only Read       K
2
ecLN2_CD_Delta  Real    Only Read       K
3
ecT_He_Coil_Delta_01    Real    Only Read       K
4
ecT_He_Neck_Delta_01    Real    Only Read       K
5
ecT_Delta_Coil_set      Real    Only Read       K
6
ecT_HX_LN2_set  Real    Only Read       K
7
ecLN2_CD_limit  Real    Only Read       K

I already added them in the PLC side as controller scope signals and they are reading the corresponding values.

Thanks,
Pablo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halla_solid/attachments/20230307/fe75ef4e/attachment-0001.html>