[Dsg-dc] [New Logentry] Follow-up Re: DC Gas Mix 1 Pressure

[Marc McMullen]

I swapped in the spare and everything was ok. I think it was just a 
seating issue because the old one looks ok. These 37 pin cables need to 
be firmly secured with the screws to ensure good contact with all 
pins/sockets.


On 12/19/2017 1:30 PM, Amrit Yegneswaran wrote:
> so what happened to the cable?
>
>
>
> ------------------------------------------------------------------------
> *From: *"Marc Mcmullen" <mcmullen at jlab.org>
> *To: *"dsg-dc" <dsg-dc at jlab.org>
> *Sent: *Tuesday, December 19, 2017 1:10:07 PM
> *Subject: *[Dsg-dc] [New Logentry] Follow-up Re: DC Gas Mix 1 Pressure
>
>
>   Follow-up Re: DC Gas Mix 1 Pressure
>   <https://logbooks.jlab.org/entry/3506995>
>
> Lognumber 3506995 <https://logbooks.jlab.org/entry/3506995>. Submitted 
> by mcmullen <https://logbooks.jlab.org/user/mcmullen> on Tue, 
> 12/19/2017 - 13:06.
>
> Logbooks: 	HBDC <https://logbooks.jlab.org/book/hbdc>
> Entry Makers: 	mcmullen
> References: 	3506974 - DC Gas Mix 1 Pressure 
> <https://logbooks.jlab.org/entry/3506974>
>
> The analog signal cable has been swapped out. Signals are in the 
> normal range. All alarms are enabled.
>
>
>
> _______________________________________________
> Dsg-dc mailing list
> Dsg-dc at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-dc

-- 
Marc McMullen
Detector Support Group
757-269-7738

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_dc/attachments/20171219/4088c9c6/attachment-0002.html>