[Dsg-dc] DC Gas Mixing

[Mac Mestayer]

Thank you Brian.  I will turn off the HV immediately.  George, please look into this; it's probably a matter of all alarms not being set up.
- Mac

----- Original Message -----
From: "Brian Eng" <beng at jlab.org>
To: dsg-dc at jlab.org
Sent: Saturday, May 13, 2017 1:13:02 PM
Subject: [Dsg-dc] DC Gas Mixing

I'm not sure who (if anyone) is supposed to be watching the gas supply for the DC, but it appears as though either the CO2 ran out or the pressure needs to be adjusted as the MFCs for the CO2 are both at 100% but don't have the requested flow.

I first noticed this after seeing the pressure had got above 100 psi despite (trying) to flow 80% of the sector flows.
_______________________________________________
Dsg-dc mailing list
Dsg-dc at jlab.org
https://mailman.jlab.org/mailman/listinfo/dsg-dc