[Dsg-ft] Fwd: CSS GUI for Hall B FT Interlock System

Amrit Yegneswaran yeg at jlab.org
Wed Apr 26 12:40:01 EDT 2017 



From: "Wesley Moore" <wmoore at jlab.org> 
To: "Nathan Baltzell" <baltzell at jlab.org> 
Cc: "Peter Bonneau" <bonneau at jlab.org>, "Amrit Yegneswaran" <yeg at jlab.org>, "Brian Eng" <beng at jlab.org> 
Sent: Wednesday, April 26, 2017 11:41:06 AM 
Subject: Re: CSS GUI for Hall B FT Interlock System 

Gateway is now updated to pick up 129.57.86.160. The GUI now resolves fine on my end. 

Peter, 

On the 'Thresholds and Enable Control Settings' tab, is disabled supposed to be green? Just making sure this isn't some artifact of the a different cs-studio version. 

Wesley 

----- Original Message ----- 
> From: "Nathan Baltzell" <baltzell at jlab.org> 
> To: "Peter Bonneau" <bonneau at jlab.org> 
> Cc: "Wesley Moore" <wmoore at jlab.org>, "Amrit Yegneswaran" <yeg at jlab.org>, "Brian Eng" <beng at jlab.org> 
> Sent: Wednesday, April 26, 2017 11:10:26 AM 
> Subject: Re: CSS GUI for Hall B FT Interlock System 

> Hi Peter, 
> 
> Thanks a lot for the info. Sure, if there’s some new big issues with client 
> mode, then we certainly should try the alternative, and will be good to know 
> how these issues will affect the existing gas system in the future. 
> 
> Off hand I don’t remember all the details, but I think there were previously at 
> least some missing alarm fields (but your list looks complete). It may be that 
> newer versions are better, and/or that the EPICS side of the interlock system 
> is simple enough regardless. Anyway, I’m not opposed to running in server mode 
> if we confirm it all works ok. One thing that we usually want is to make sure 
> autosave/restore of alarm limits and severities upon ioc (crio) reboot works; 
> maybe you already have that. 
> 
> I’ll take a look at the PV list and get back to you next week (I’m out for the 
> rest of the week). A channel access gateway should be pointing to your crio 
> shortly, and your screen is linked from the FT main menu (which I need to clean 
> up one day, along with some of the other growing menus ...). 
> 
> Thanks, 
> Nathan 
> 
> 
> 
> On Apr 26, 2017, at 8:38, Peter Bonneau <bonneau at jlab.org> wrote: 
> 
>> Hi Nathan, 
>> 
>> The Excel file named FT Hardware Interlock System Design Documentation.xlsx on 
>> the website listed below has a tab with the EPICS PV's. 
>> 
>> https://userweb.jlab.org/~bonneau/FT%20Hardware%20Interlock%20System/System%20Documentation/ 
>> 
>> The IP address for the FT cRio is 129.57.86.160. 
>> Regarding the cRio as an EPICS server or client, Brian has found a problem while 
>> using the client configuration on the gas system. He's discovered it doesn't 
>> always work on the newer cRio processors like the one used on the FT. He's been 
>> looking into this problem and has submitted a service ticket to National 
>> Instruments requesting a fix for this bug. So far, NI has not resolved 
>> this issue. 
>> 
>> The FT cRio was configured as an EPICS server to see if we can duplicate this 
>> problem in this configuration. We use the EPICS server configuration in other 
>> critical cRio applications such as the Torus and Solenoid FastDaq. I've been 
>> working on the FT cRio as an EPICS server for a week and haven't been able to 
>> duplicate this problem yet. 
>> Do we know which fields are missing from the NI EPICS implementation? I'd like 
>> to submit a service ticket request to NI to implement any missing fields. At 
>> the most, the interlock systems will have ~ 7 Boolean signals each in the 
>> alarm handler to indicate the operating status of the system. 
>> The NI EPICS fields implemented for a Boolean are: OSV, SEVR, STAT, VAL, ZSV. 
>> 
>> The NI EPICS fields implemented for a double are: HHSV, HIGH, HIHI, HSV, LLSV, 
>> LOLO, LOW, LSV, SEVR, STAT, VAL. 
>> 
>> Thanks, 
>> 
>> Peter 
>> 
>> On 4/25/2017 10:08 AM, Nathan Baltzell wrote: 
>>> Thanks Peter, 
>>> 
>>> Yes, it is definitely important to have all DSG's Hall B hardware interlocks in 
>>> EPICS. We weren't aware you were also working on cs-studio user interfaces, 
>>> but that is certainly welcome! 
>>> 
>>> 
>>>> A softIOC is not needed since the FT Interlock cRio is configured as an EPICS 
>>>> server (IOC). 
>>>> 
>>> I’m not so sure about this. On cRios, one thing we've found necessary in the 
>>> past, in order to get full EPICS functionality, is to have them read/write 
>>> (e.g. at 1 Hz) to duplicate soft channels (with different names) on a real 
>>> EPICS ioc. This is due to incomplete EPICS implementation on the cRio/labview, 
>>> e.g. alarm fields. Brian has helped with this previously for all the gas cRios 
>>> in Hall B. 
>>> 
>>> It would be nice if we can modify and shorten the PV names on this softioc from 
>>> what you have in your pdf, in order to fit the existing conventions in the rest 
>>> of Hall B EPICS. Can you provide the PV list in a format that is easily 
>>> modifiable (e.g. excel, ascii)? Then we can converge on the names and 
>>> generate the softioc. 
>>> 
>>> Also, we'll need to know this cRio’s ip address. 
>>> 
>>> And later we can discuss what needs to go in the alarm handler ... 
>>> 
>>> Thanks, 
>>> Nathan 
>>> 
>>> 
>>> 
>>> 
>>> On Apr 25, 2017, at 6:54 AM, Peter Bonneau 
>>> <bonneau at jlab.org> 
>>> wrote: 
>>> 
>>> 
>>>> Wesley, 
>>>> 
>>>> Under the Detector/FT menu in the clas12_menu.opi file, there needs to be GUI's 
>>>> for the FT Interlock system. 
>>>> The CSS test GUI we made to test the FT EPICS interface could be used, however 
>>>> it does not look like the other existing CLAS12 GUI's (compact, dark colored 
>>>> background, etc.). 
>>>> In the new SVT svtOverview.opi, a section for hard interlocks has been added. 
>>>> GUI's similar to this is needed for the FT. 
>>>> A softIOC is not needed since the FT Interlock cRio is configured as an EPICS 
>>>> server (IOC). 
>>>> Regarding the alarm handler, there will be a few signals for the handler to 
>>>> report the status of the system. We'll list them later after talking to the FT 
>>>> group that is coming in May. 
>>>> DSG will be implementing a similar new Hardware Interlock System for the RICH in 
>>>> the upcoming few months. We'll also be upgrading the existing SVT Hardware 
>>>> Interlock System to include the EPICS interface that will use the GUI's that 
>>>> have been started already. I'll mention these projects in the next slow 
>>>> controls meeting. 
>>>> Peter 
>>>> 
>>>> On 4/24/2017 11:01 AM, Wesley Moore wrote: 
>>>> 
>>>>> Peter, 
>>>>> 
>>>>> It's not clear what you are asking. It looks like you are pretty far along. 
>>>>> The older version of cs-studio you are using may have compatibility issues 
>>>>> with the latest version we are testing. But that's easy to try. 
>>>>> 
>>>>> The documentation and block diagram you doesn't really answer these things: 
>>>>> 
>>>>> Do you need a softIOC to write these PVs too or did you make one? 
>>>>> Do you need the alarm handler setup? 
>>>>> 
>>>>> You still have a standing invitation to the slow controls meetings. But as 
>>>>> Brian/George did for gas systems, you can keep us in the loop without 
>>>>> attending. 
>>>>> 
>>>>> Wesley 
>>>>> 
>>>>> From: "Peter Bonneau" 
>>>>> <bonneau at jlab.org> 
>>>>> 
>>>>> To: "Wesley Moore" 
>>>>> <wmoore at jlab.org> 
>>>>> 
>>>>> Cc: 
>>>>> dsg-ft at jlab.org 
>>>>> 
>>>>> Sent: Monday, April 24, 2017 9:08:21 AM 
>>>>> Subject: CSS GUI for Hall B FT Interlock System 
>>>>> Hello Wesley, 
>>>>> 
>>>>> The Hall B FT group needs a CSS GUI for the FT Hardware Interlock System. This 
>>>>> GUI would be integrated into the other FT EPICS screens. 
>>>>> 
>>>>> The FT Hardware Interlock System is an independent backup system which can 
>>>>> disable the LV, HV, and FT chiller. The system can be monitored and trip 
>>>>> thresholds adjusted via Labview and/or an EPICS GUI. 
>>>>> DSG has completed the initial programming on the cRio for the EPICS interface. 
>>>>> Located in the EEL building and configured as an EPICS server, the PV signals 
>>>>> are now available via the Hall B .86 subnet. The EPICS interface has been 
>>>>> tested via a CSS test GUI. 
>>>>> Detailed information on the system configuration, hardware, EPICS PV signal 
>>>>> names, CSS test screen .OPI file, and LabVIEW interface can be found on the FT 
>>>>> Hardware Interlock System website here: 
>>>>> 
>>>>> https://userweb.jlab.org/~bonneau/FT%20Hardware%20Interlock%20System/ 
>>>>> 
>>>>> Peter 
>>>>> 
>>>>> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_ft/attachments/20170426/49b516d0/attachment-0002.html>

More information about the Dsg-ft mailing list