[Dsg-ft] FT low voltage supply

[Andrea Celentano]

Hi Chris,
sorry for late reply.. I just come back from vacation yesterday. Looking at the picture, it seems to me this hardware is related to the Forward Tagger Tracker. I am forwarding this also to French people in charge of it (cc this message).
I also forward this to DSG people, who are on site and who can fix this issue.

I also update you about the VME boards we talked about few weeks ago.. unfortunately, at the moment the MOU between JLab and INFN is still to be signed for renewal, hence it is very difficult to arrange a loan from JLab to INFN (Sergey has the boards available, in any case.. so I’ll follow this and as soon as the MOU is signed, I’ll move forward)


Bests

Andrea


> On Aug 22, 2017, at 20:51, Chris Cuevas <cuevas at jlab.org> wrote:
> 
> Here is a photo of the rear of rack SW-05.
> 
> ----- Original Message -----
> From: "C. Cuevas" <cuevas at jlab.org>
> To: "Andrea Celentano" <andrea.celentano at ge.infn.it>
> Cc: "Mark Taylor" <taylorw at jlab.org>
> Sent: Tuesday, August 22, 2017 2:33:49 PM
> Subject: FT low voltage supply
> 
> Hi Andrea,
> 
> You are probably not on site, but during a quick safety walk through in Hall B this morning, 
> I noticed that there were a few cables from a WIENER supply that could be held in place with some
> strain relief and the rear terminals of the supply should have a plastic(non-conductive) barrier.
> 
> This hardware is located in subway rack SW-05 and I do not know what part of the FT detector system 
> is powered from this WIENER supply.
> 
> No hurry, and if there is someone on site that can help with this please forward this message
> accordingly.
> 
> Thanks,
> -Chris
> ~~~~~~~~~~~~~<Hall B Safety Observation 8_ 22_  17 ___ Photo 2 of 4  __ Electrical Cables without Strain Relief.jpg>