[Dsg-ft] FT cRio

[Amanda Hoebel]

Hi Raffaella,

Tyler, Pablo, and I checked the cable connections to the cRIO. The cables on the cRIO side appear to be fine, however we cannot get a resistance reading from the RTD cable on the detector side. We believe there is a loose connection on the detector side or something may be disconnected entirely. We spoke with Morgan and he said he will take a look at it at a later time. Everything other than the calorimeter RTDs is reading correctly.

Regards,
Amanda

----- Original Message -----
From: "Raffaella De Vita" <devita at ge.infn.it>
To: "Amanda Hoebel" <amandah at jlab.org>
Cc: "dsg-ft" <dsg-ft at jlab.org>
Sent: Tuesday, June 26, 2018 10:03:21 AM
Subject: Re: FT cRio

Hi Amanda,
all the cables are connected but it looks like the readback does not 
update. Also hodoscope temperature, humidities and flow are always the 
same even if we varied for example the flow.
Thanks,
     Raffaella

Amanda Hoebel wrote:
> Hi Raffaella,
>
> We see that the calorimeter temperature sensors appear to be disconnected. Are any of the cables detached?
>
> Regards,
> Amanda
>
> ----- Original Message -----
> From: "Raffaella De Vita" <devita at ge.infn.it>
> To: amandah at jlab.org
> Cc: "dsg-ft" <dsg-ft at jlab.org>, mcookiv at jlab.org
> Sent: Tuesday, June 26, 2018 8:24:53 AM
> Subject: FT cRio
>
> Hi Amanda,
> We are restarting the FT after maintenance and we are having troubles reading temperatures and humidity via the CRio: the GUI shows numbers but doesn’t seem to update them. Would you be able to take a look?
> Thanks,
> Raffaella