[dsg-hallb_gas] ALERT instrumentation cabling

[Morgan Cook IV]

Thanks Marc, We'll get to it tomorrow.

-Morgan
________________________________
From: Marc Mcmullen <mcmullen at jlab.org>
Sent: Thursday, November 14, 2024 12:56 PM
To: Morgan Cook IV <mcookiv at jlab.org>; Bob Miller <rmiller at jlab.org>
Cc: Marc Mcmullen via dsg-hallb_gas <dsg-hallb_gas at jlab.org>
Subject: Re: ALERT instrumentation cabling

Hi Morgan,

I just dropped off the last two 3 pair cables that need to be run to L1-19. I put a temporary label on the L1-19 end of each.

Let me know when those are run and the solenoid coils and pt406 and pt110 are run to the panel and I’ll come and do the connections.

Marc

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: dsg-hallb_gas <dsg-hallb_gas-bounces at jlab.org> on behalf of Marc Mcmullen via dsg-hallb_gas <dsg-hallb_gas at jlab.org>
Sent: Wednesday, November 13, 2024 4:00:00 PM
To: Morgan Cook IV <mcookiv at jlab.org>
Cc: Marc Mcmullen via dsg-hallb_gas <dsg-hallb_gas at jlab.org>
Subject: [dsg-hallb_gas] ALERT instrumentation cabling

Hi Morgan,

Brian and I were working on connecting the mass flow controllers this morning. Those should be online once Sergey and Brian have a look at the switch on the cart.

As far as the cables are concerned, there are 3 solenoid coils and two pressure transducer cables in the short cable tray (see attached) that leads over to the cart that need to be pulled over. There will also need to be two other 3 pair cables, one we are making with enough length to pull from L1-19 to the cart. The other is just a 3 pair which will not need any modification.

If your group can pull over the 3 solenoid coil and connectors for PT110 and PT406 (all in the short cable tray near the beam line), we will modify the one 3 pair and give you the second 3 pair to be run sometime tomorrow.

Marc



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_gas/attachments/20241114/49f406ea/attachment.html>